EXP2 Expression Pedal with the SV-1

Discussion relating to the Korg SV-1 Stage Vintage Piano

Moderators: Sharp, X-Trade, Pepperpotty, karmathanever

Post Reply
east3rd
Posts: 5
Joined: Tue Jun 15, 2010 4:07 pm

EXP2 Expression Pedal with the SV-1

Post by east3rd »

Hi folks. I've got the EXP2 expression pedal hooked up to the SV-1. It's working fine, controlling wah and volume, but the minimum volume setting on the pedal doesn't seem to have any effect when used with the SV-1 as a volume pedal (bummer!). Does this feature only work when using the pedal as a pass-through?
User avatar
jg::
Platinum Member
Posts: 685
Joined: Thu Aug 14, 2003 3:53 am
Location: Melbourne, Australia

Post by jg:: »

Yes, I think you're right there.

jg::
User avatar
holdsg
Full Member
Posts: 229
Joined: Wed Dec 02, 2009 4:29 am
Location: Alta Loma, CA

EXP2 sensitivity

Post by holdsg »

Hi, noticed you are using the EXP2. I just got mine, and practiced once with it. Do you know if there is any way to adjust the foot pressure/sensitivity to make it a bit harder to push down, seems to me to move at the slightest foot pressure, which is way different from any foot pedal I am used to. Trying to lower the learning curve, thanks.
Bass and keyboard player, not usually at the same time, but sometimes in the same song!
Boards: Kronos 2, and Hammond SK1
Basses: Fender, G&L
User avatar
mocando
Platinum Member
Posts: 1241
Joined: Tue Apr 21, 2009 9:35 pm
Location: Panama City, Panama
Contact:

Re: EXP2 sensitivity

Post by mocando »

holdsg wrote:Hi, noticed you are using the EXP2. I just got mine, and practiced once with it. Do you know if there is any way to adjust the foot pressure/sensitivity to make it a bit harder to push down, seems to me to move at the slightest foot pressure, which is way different from any foot pedal I am used to. Trying to lower the learning curve, thanks.
I have the same pedal and also a Roland and an M-Audio. Of all the most comfortable to use is the M-Audio. It does is a bit harder to push than the other two.

Let me take a look at the EXP2 to see if trying to tighten the screw that holds the axis to the pedalboard can make it stiffer.
Martin Ocando

Korg Gear: Wavestation
Korg Software: KLC Wavestation, iWavestation for iPad
Non Korg: M-Audio Code 61 MIDI Controller, Nektar GX49 MIDI Controller
Music Computing: 16in Macbook Pro with Touch Bar Mid 2019, i9 32GB RAM 2TB Flash, MacOS Catalina - 2019 iPad Air 64GB
Software: Apple MainStage, Arturia V Collection 7, Arturia OB-Xa V
Visit: <a href="http://korgfans.wordpress.com">Synth Fans :: Everything Synths</a> Twitter: <a href="http://twitter.com/korgfans">@korgfans</a>
jerrythek
Platinum Member
Posts: 2931
Joined: Mon Jan 28, 2002 11:06 pm

Post by jerrythek »

It is the spec/design of the SV-1 that it doesn't go down to complete silence. That is different from most other Korg keyboards - does that bother you? I'd be interested in knowing...

regards.

Jerry
east3rd
Posts: 5
Joined: Tue Jun 15, 2010 4:07 pm

Post by east3rd »

jerrythek wrote:It is the spec/design of the SV-1 that it doesn't go down to complete silence. That is different from most other Korg keyboards - does that bother you? I'd be interested in knowing...
It certainly doesn't bother me-- I just wish that the minimum volume was configurable. It's too sensitive for swells.
Keyboarder
Posts: 3
Joined: Wed May 19, 2010 7:01 am
Location: Switzerland

Post by Keyboarder »

jerrythek wrote:It is the spec/design of the SV-1 that it doesn't go down to complete silence. That is different from most other Korg keyboards - does that bother you? I'd be interested in knowing...
It certainly does bother me. Some time ago i have posted the following:
Keyboarder wrote:I am using a Yamaha FC7 Volume Foot Control Pedal.

Unfortunately I am not able to get my Pedal to work properly as a Volume Pedal. If I lower down the Pedal to the lowest position the sound won't go off and pushing it forward toward the maximum position the sound isn't getting continously louder. It seems to be like an exponential curve. So little changes on the Pedal near the max position results in huge volume changes - this is really annoying!

Maybe I am doing something wrong? Does anyone have an idea / any help?
You can find my post in this topic: http://www.korgforums.com/forum/phpBB2/ ... highlight=

So, it isn't only that the sound doesn't go down to complete silence when pedal is at lowest position. The behavior of the sound troughout the whole pedalrange doesn't suit to me.
Yes, I have calibrated the pedals.

Keyboarder
drsteve
Posts: 5
Joined: Mon Dec 27, 2010 1:49 pm

EXP2 Expression Pedal with the SV-1

Post by drsteve »

I've just received the EXP-2 and can't seem to get it to function with the SV-1. I have followed the SV-1 UM and also tried some logical hook-ups but nothing seems to work. Can someone give me some guidance, or is there something wrong with this combo? Thx


Never mind: I found info on the xvp-10; use the output2 rather them input for the connection.

As for the volume, it doesn't cut out on the low end, which I can live with; but when I switch from piano to organ it jumps to full volume and I have to tap the pedal to get it re-set properly. Any hints? Is the xvp-10 any better?
muzik4uj
Posts: 1
Joined: Mon Sep 26, 2011 3:43 pm

EXP-2 Pedal

Post by muzik4uj »

I am finding the same trouble. Cannot use the expression pedal recommended when playing the organ. Difficult when trying to switch back to piano sounds.

Anyone come up with any solutions? This is frustrating.
velour100
Posts: 35
Joined: Fri Feb 12, 2010 12:06 pm
Location: The Netherlands, Europe

Post by velour100 »

There is NO solution then tap the pedal again to lower the volume of the organ again. And, watch out, if you tap the pedal for a different sound, it wil lower that sound as well..!!

But again, we have posted this in an older topic, but we never received an anwser from Korg...
Playing the brand new Korg SV1 88.
D-Train
Posts: 5
Joined: Thu Jun 24, 2010 1:38 pm

Post by D-Train »

When I push the pedal all the way down, I go silent.

There is an adjustment on the pedal itself to set where the lowest point is.
You can set it to "zero" or higher.

Check there.
Post Reply

Return to “KORG SV-1 ”