Page 1 of 1
insert fx only one upper
Posted: Tue Nov 03, 2015 9:31 am
by sas123
why only one we can put insert fx in uppers
i meen if you want to put in upper 2 the upper 1 close automatic
Re: insert fx only one upper
Posted: Tue Nov 03, 2015 12:11 pm
by Bachus
sas123 wrote:why only one we can put insert fx in uppers
i meen if you want to put in upper 2 the upper 1 close automatic
Because there is only a sinle insert effect available for the 4 keyboard parts, that can only be assigned to a single part at the same time...
Why?
Using old and slow hardware...
To me the whole number of effects is totally unacceptable for such an expensive instrument
Re: insert fx only one upper
Posted: Thu Nov 05, 2015 2:19 pm
by Paolo@Korg
sas123 wrote:why only one we can put insert fx in uppers
i meen if you want to put in upper 2 the upper 1 close automatic
sas,
If needed, you can use MFX2 in the FXB Group as an additional IFX.
1. Go to the Mixer/Tuning > Volume/Pan page, and deselect the Dry checkbox from all the Keyboard Sounds.
2. Go to the Mixer/Tuning > FX Send page, and set the Master 2 send level to 127 on the Keyboard Sound that will have to use the additional IFX. This will set the mix of the additional IFX.
3. Go to the Master Effects > FX B page, use the "to FX1" parameters to set the amount of the MFX2 signal to be sent back to the MFX1 processor. This will set the send level from the additional IFX to MFX1.
Best,
Paolo