why only one we can put insert fx in uppers
i meen if you want to put in upper 2 the upper 1 close automatic
insert fx only one upper
Moderators: Sharp, X-Trade, Pepperpotty, karmathanever
Re: insert fx only one upper
Because there is only a sinle insert effect available for the 4 keyboard parts, that can only be assigned to a single part at the same time...sas123 wrote:why only one we can put insert fx in uppers
i meen if you want to put in upper 2 the upper 1 close automatic
Why?
Using old and slow hardware...
To me the whole number of effects is totally unacceptable for such an expensive instrument
-
Paolo@Korg
- Korg Italy
- Posts: 1090
- Joined: Sat Dec 07, 2002 12:07 pm
Re: insert fx only one upper
sas,sas123 wrote:why only one we can put insert fx in uppers
i meen if you want to put in upper 2 the upper 1 close automatic
If needed, you can use MFX2 in the FXB Group as an additional IFX.
1. Go to the Mixer/Tuning > Volume/Pan page, and deselect the Dry checkbox from all the Keyboard Sounds.
2. Go to the Mixer/Tuning > FX Send page, and set the Master 2 send level to 127 on the Keyboard Sound that will have to use the additional IFX. This will set the mix of the additional IFX.
3. Go to the Master Effects > FX B page, use the "to FX1" parameters to set the amount of the MFX2 signal to be sent back to the MFX1 processor. This will set the send level from the additional IFX to MFX1.
Best,
Paolo