Connecting Breath controler on X2

Discussions relating to the Korg Pa2X Pro, Pa800 & Pa500

Moderators: Sharp, X-Trade, Pepperpotty, karmathanever

ova
Senior Member
Posts: 312
Joined: Mon Mar 15, 2010 9:48 pm
Location: Canada

Post by ova »

Then you got it. It controls the volume of upper one because it"s on midi channel 1. With the 2 controls on the headset you can control the intensity and the gain level.
User avatar
Jano
Full Member
Posts: 110
Joined: Mon Apr 09, 2007 7:46 pm

Post by Jano »

lol well when I blow in it nothing happens
ova
Senior Member
Posts: 312
Joined: Mon Mar 15, 2010 9:48 pm
Location: Canada

Post by ova »

ADJUST THE 2 CONTROLLERS ON THE HEADSET. PUT THEM IN THE MIDDLE AND TRY AND ADJUST ACCORDINGLY. MAKE SURE THE MIDIS ARE CONNECTED BEFORE YOU TURN THE MACHINE ON.
ova
Senior Member
Posts: 312
Joined: Mon Mar 15, 2010 9:48 pm
Location: Canada

Post by ova »

One more thing: go to GLOBAL settings, MIDI, on the bottom choose Midi In Channel (3rd from left), put CH01: "UPPER" instead of "Ply.1 Tr 01" that is by default. Save it as "My setup" or any other name.
Then adjust the Gain and Offset on the headset.
This should defiantly resolve your problem. Good luck.
Avo
User avatar
Jano
Full Member
Posts: 110
Joined: Mon Apr 09, 2007 7:46 pm

Post by Jano »

Ova I've tried this before nothing works
User avatar
Jano
Full Member
Posts: 110
Joined: Mon Apr 09, 2007 7:46 pm

Post by Jano »

I've finally succeeded to connect the BC3 on my X2, it was stuck with dust that's why it didn't work lol :D
User avatar
tscostas
Posts: 4
Joined: Sat Jun 06, 2009 4:55 pm
Location: Cyprus

Post by tscostas »

Thanks Ova. I did it. It works... . :wink:
Post Reply

Return to “Korg Pa2XPro - Pa800 - Pa500”