Connecting Breath controler on X2

ova · Post by **ova** » Thu May 06, 2010 9:33 pm

Then you got it. It controls the volume of upper one because it"s on midi channel 1. With the 2 controls on the headset you can control the intensity and the gain level.

Jano · Post by **Jano** » Fri May 07, 2010 7:23 am

lol well when I blow in it nothing happens

ova · Post by **ova** » Fri May 07, 2010 6:50 pm

ADJUST THE 2 CONTROLLERS ON THE HEADSET. PUT THEM IN THE MIDDLE AND TRY AND ADJUST ACCORDINGLY. MAKE SURE THE MIDIS ARE CONNECTED BEFORE YOU TURN THE MACHINE ON.

ova · Post by **ova** » Fri May 07, 2010 8:41 pm

One more thing: go to GLOBAL settings, MIDI, on the bottom choose Midi In Channel (3rd from left), put CH01: "UPPER" instead of "Ply.1 Tr 01" that is by default. Save it as "My setup" or any other name.
Then adjust the Gain and Offset on the headset.
This should defiantly resolve your problem. Good luck.
Avo

Jano · Post by **Jano** » Tue May 11, 2010 6:12 am

Ova I've tried this before nothing works

Jano · Post by **Jano** » Thu May 20, 2010 1:28 pm

I've finally succeeded to connect the BC3 on my X2, it was stuck with dust that's why it didn't work lol

tscostas · Post by **tscostas** » Sun May 23, 2010 10:48 pm

Thanks Ova. I did it. It works... .