Korg Pa4X 1,7GB RESTORE ERROR

[korgpask]

I have Pa4X and my backup is full.
USER 1,2,3,4,5,6 VOICE + USER DK 1,2
RAM memory is full. Backup 1.67GB!
When I did a factory reset, the Pa4X tool worked correctly.
Then my RESOUCES RESTORE 1.67GB. The tool only restarts the old way!!!!!!!!!!
ATTENTION large - full RAM and backup - RESOUCES BACKUP
Then recovery leads to tool damage !!!!!!!!!!!!!!!!!!!!
Pa4X OS in 310 cannot handle such a large amount of backup and will corrupt the tool. I hereby salute KORG
I'm doing everything right!!!!!!! I consider this a FATAL MISTAKE and tool destruction !!!!!!!!!!


I recommend: NEVER do this if the backup exceeds 1.45GB !!!!!!!!!!!!!!!!!!

You will seriously destroy - you will damage the tool !!!!!!!!! You are doing everything right as you did many times before, but the advance was smaller.

[karmathanever]

I read something about this a fair while ago - from Antony Sharmann - here:-
http://www.korgforums.com/forum/phpBB2/ ... p?t=119097

Also here in more detail (scroll down about 13 posts on this first page):-
http://www.korgforums.com/forum/phpBB2/ ... p?t=119027

Cheers

Pete

[korgpask]

Even when loading the SAVE ALL backup, all is not well. There is a loss of data - samples
Result: Not all samples were loaded.
Some will be missing.

Such announcements are written by the screen for LOAD USER SOUND
"sample data is incomplete"

[karmathanever]

Even when loading the SAVE ALL backup, all is not well. There is a loss of data - samples
Result: Not all samples were loaded.
Some will be missing.

If your data is >1GB then I would think this is the problem.

[korgpask]

yes, thanks for the info, that's right. I put together Pa USER sounds from the backups I had. It's OK now.

[AntonySharmman]

Such announcements are written by the screen for LOAD USER SOUND
"sample data is incomplete"

Loading SOUND from a SET is the only way to see missing samples problems in your SET , while LOAD ALL never show this detail in PaSeries.