Rotary switch for organs

Discussion relating to the Korg Krome Workstation.

Moderators: Sharp, X-Trade, Pepperpotty, karmathanever

Post Reply
User avatar
ultrasteve
Posts: 33
Joined: Sat Feb 05, 2011 9:44 pm
Location: SE Michigan

Rotary switch for organs

Post by ultrasteve »

I have a friend that uses a Nord for organ sounds. He has a pedal to turn on the "Leslie" feature. It spins as long as he depresses the pedal. Can I do this with my Krome?
User avatar
Musicwithharry
Platinum Member
Posts: 694
Joined: Fri Mar 23, 2012 3:58 am
Location: Anamosa, IA
Contact:

Re: Rotary switch for organs

Post by Musicwithharry »

ultrasteve wrote:I have a friend that uses a Nord for organ sounds. He has a pedal to turn on the "Leslie" feature. It spins as long as he depresses the pedal. Can I do this with my Krome?
You should be able to do this. I use a foot pedal (switch) on my Korg Kross for that very thing. In the Rotary effect, you will need to go in there and select the foot switch to turn things on/off. You may also have to go into the Global settings and set the footswitch to be a momentary operation instead of toggle.

On my Korg Kross, I use the footswitch in toggle mode, so it turns on when I press it and turns off when I press it again.

Grace,
Harry
Alesis Vortex Keytar, Alesis QS6.2, Alesis QSR, Alesis SR-16, Behringer Deepmind-12, Ensoniq Avista 7600, Ensoniq VFX, Ensoniq VFX-SD, Ensoniq SQ1+, (2) Ensoniq SQ-R+/32, Korg i3 (2020 Version), (2) Korg Kross 1-61, (2) Korg Kross 1-88, Korg Minilogue XD, Korg Minilogue XD Module, Korg M50-61, Korg PA700, Korg X5DR, Korg Z3, Kurzweil SP1, Lowrey EZP3 (bascially a Kawai), Roland D-05, Roland E-09, Waldorf Streichfett, Yamaha Reface CP, Yamaha Reface CS, Yamaha Reface DX, Yamaha Reface YC
Post Reply

Return to “Korg Krome”