Minilogue don't work after update to 2.01

Discussion relating to all other Analog KORG synth related products that don’t have a dedicated section.

Moderators: Sharp, X-Trade, Pepperpotty, karmathanever

Post Reply
whathappenedtome
Posts: 4
Joined: Wed Aug 21, 2019 6:35 pm

Minilogue don't work after update to 2.01

Post by whathappenedtome »

I tried to update firmware of my Minilogue to 2.01 but forgot update "KORG USB-MIDI Driver" and now updating process not complete.

The "KORG System Update" app upload new version of firmware to my Minilogue. "KORG System Update" finished uploading and show error message. But don't give a reload firmware. Now when I turn on Minilogue it show "[Update Panel...] is displayed press [8]". And when I press 8 the synth do nothing. Black Screen. For the long time.

In manual wrote "While updating the panel firmware the display will turn dark, but please do not turn the power off. After about 15 seconds, the update procedure will complete and the display will be re-enabled". But after 15 sec... 30 sec... 5 min... Nothing. Only the darkness and disappointed.

After rebooting, it repeats again.

How can I fix it?
slug
Senior Member
Posts: 371
Joined: Fri Aug 03, 2007 2:59 am

Post by slug »

Are you able to restart the Minilogue in update mode?
whathappenedtome
Posts: 4
Joined: Wed Aug 21, 2019 6:35 pm

Post by whathappenedtome »

slug wrote:Are you able to restart the Minilogue in update mode?
Yes

Image
slug
Senior Member
Posts: 371
Joined: Fri Aug 03, 2007 2:59 am

Post by slug »

Well you didn't say you had tried a second time, so what happens if you try to run the installer again?
whathappenedtome
Posts: 4
Joined: Wed Aug 21, 2019 6:35 pm

Post by whathappenedtome »

slug wrote:Well you didn't say you had tried a second time, so what happens if you try to run the installer again?
I was update the Korg Driver already (uninstal and instal new). But when I start "KORG System Update" app then it detect new firmware and I can't do anything

Image
whathappenedtome
Posts: 4
Joined: Wed Aug 21, 2019 6:35 pm

Post by whathappenedtome »

I was able to fix it using "Force Update Mode" in dropdown menu of the "KORG System Update" app
Post Reply

Return to “Korg Analog Synths (General)”