PA1000 noise
Moderators: Sharp, X-Trade, Pepperpotty, karmathanever
-
- Posts: 6
- Joined: Sat Mar 10, 2018 11:33 pm
PA1000 noise
I bought PA1000 two months ago. Seems like every second or third day, I hear a buzzing noise from the speakers and all the buttons stop working. Restarting it resolves the issue until a couple days later. Is anyone else experiencing this? Is there a resolution for this?
Thanks,
Thanks,
- mrniceneasy
- Platinum Member
- Posts: 1125
- Joined: Tue Nov 04, 2008 11:07 am
- Location: UK
- Contact:
I would consider saving all my work and then doing a factory reset. Who knows that may sort out the problem.... Media -> tab to Utility and Factory Restore button...
If that doesn't work then I would contact the Dealer you bought it from. Sounds like it could be an intermittent electrical component fault although I'm no expert and possibly wrong.
If that doesn't work then I would contact the Dealer you bought it from. Sounds like it could be an intermittent electrical component fault although I'm no expert and possibly wrong.

Regards, Keith [pa1000]
www.korgpahelper.yolasite.com/
www.korgpahelper.yolasite.com/
Buzzing Noise
I bought Pa1000 on end of January and experienced the same problem exactly the same way within my first week (but it never happened again). Really don't know what the matter is. I also thought of taking a video next time. 

-
- Posts: 6
- Joined: Sat Mar 10, 2018 11:33 pm
korg PA1000 NOISE AND HANGING
HI THERE I ALSO BOUGHT MY PA1000 2 MONTHS AGO AND ENCOUNTERED THIS SAME PROBLEM THE INSTRUMENT STOPS WORKING ALL OF A SUDDEN AND EMITS A STEADY BUZZ SOUND THAT CAN ONLY DISAPPEAR BY TURNING IT OFF AND ON AGAIN .PLEASE IF ANY BODY KNOWS WHAT IS THE CAUSE OF THIS PROBLEM OR HOW TO RESOLVE IT PLEASE LET US KNOW .THANK YOU ALL VERY MUCH IN ADVANCE
-
- Platinum Member
- Posts: 890
- Joined: Thu Mar 22, 2012 9:24 pm
Pa1000
Is this noise still sounding with the volume off ?
-
- Posts: 6
- Joined: Sat Mar 10, 2018 11:33 pm
PA1000 noise
Hello guys,
thx for the quick reaction to my little problems!:)
After about 35 days of the noise from the speakers each 2nd day, all of a sudden no more noise... (surprise...). So, any ideas, how is that possible? If any of you have been experienced the same mysteries, pls let me know. thx.
Alex
thx for the quick reaction to my little problems!:)
After about 35 days of the noise from the speakers each 2nd day, all of a sudden no more noise... (surprise...). So, any ideas, how is that possible? If any of you have been experienced the same mysteries, pls let me know. thx.
Alex
I experienced the same issue. A big noise, even with distorsion. But if i press Shift+Stop, the noise will stop. At first i was scared and i thought my pa1000 is broken or something. But after some investigations i discovered that the fault was a Percution Kit and a Drum Kit with bad samples. The samples were not corectly imported into the corect category(bass drum, snare drum, or percution, etc) and were imported to SFX category (wich is wrong) and had loops, like the samples from sounds. After i removed the loops and saved the samples again, into the corect category, the noise was gone.
Korg pa1000
-
- Posts: 6
- Joined: Sat Mar 10, 2018 11:33 pm
PA1000 noise
Hi, Angelitto thx a lot for your sharing story in re to the noise. would you pls advise which particular drum set was wrong, maybe you could suggest how i can fix this drum set to resolve this noise problem permanently? Thx again in advance!
Alex
Alex
-
- Junior Member
- Posts: 64
- Joined: Sat Sep 07, 2002 5:52 pm
-
- Junior Member
- Posts: 64
- Joined: Sat Sep 07, 2002 5:52 pm
After some more investigations it seems that the responsable for this mess is an efect called ”Decay”. I went to Sound, and i selected the Drum Kit with that error and i pressed menu/DrumKit. in there, I looked closely at every note and i saw that some of them had decay +63. So, i checked all notes and changed the high decay (if were the case) to max +20. After that i saved the drum Kits and it seems all is good now. No more strange noise when i select that drum Kit and play it in a style.angelitto wrote:I experienced the same issue. A big noise, even with distorsion. But if i press Shift+Stop, the noise will stop. At first i was scared and i thought my pa1000 is broken or something. But after some investigations i discovered that the fault was a Percution Kit and a Drum Kit with bad samples. The samples were not corectly imported into the corect category(bass drum, snare drum, or percution, etc) and were imported to SFX category (wich is wrong) and had loops, like the samples from sounds. After i removed the loops and saved the samples again, into the corect category, the noise was gone.
These new keyboards (pa700/pa1000)are more sensitive and acurate and we may need to make some tweaks for old sets to be played corectly.
Korg pa1000