Korg EXi Authorization without Korg User Net?

Kevin Nolan · Post by **Kevin Nolan** » Thu Jan 18, 2018 9:29 pm

Does anyone know how we'll authorize EXi's in the future if needing to reinstall the OS on hew Hard Disks if Korg User Net is gone?

Will we be able to do it via Korg ID?

Thanks,
Kevin.

Akos Janca · Post by **Akos Janca** » Fri Jan 19, 2018 10:18 am

Dear Kevin,

I think it's a good idea to write our existing codes down, from the OASYS or via the website https://www.korguser.net/oasys/login_menu/reissue.asp

If somebody hasn't received the codes yet he can login to https://www.korguser.net/oasys then click the reddish link on the left side called "Free Authorizations" for them.

Cheers,
Akos

Kevin Nolan · Post by **Kevin Nolan** » Fri Jan 19, 2018 11:12 pm

HI Akos -

How do you explicitly see your existing codes (I just see a link to get new codes)

I'm rusty on the process - if one reinstalls - can the existing codes be used to reauthorise?

Note - I got a reply back from Korg UK today and here is their reply, verbatim:

"At this point, it is not yet decided how support for the OASYS will be handled going forward. KORG USER NET will likely stay available until another option is arranged for this - there is no need for any concern."

Good News!

Akos Janca · Post by **Akos Janca** » Mon Jan 22, 2018 12:52 pm

Hi Kevin,

These are my hints only, I haven't tried it but the website says you have to enter your OASYS' Public ID and password. Then I think the existing codes will be shown.

I think we can use our codes after reinstallation (but I'm not sure).

Thank you for those good news! I haven't received such message yet.

Kevin Nolan · Post by **Kevin Nolan** » Thu Jan 25, 2018 3:28 am

Thanks for that Akos - I'll try it out.

Akos - I wasn't 'sent' that message - I emailed Korg Support in the UK (my Korg support centre as there is no Korg support in Ireland) - and they responded with that message. So you won't receive that message.

Best regards,
Kevin.

Akos Janca · Post by **Akos Janca** » Thu Jan 25, 2018 2:32 pm

Thanks, good to know.
Best,
Akos

jbeliz · Post by **jbeliz** » Fri Jan 26, 2018 3:43 pm

Yeah just go to korguser.net and login then go to Oasys you have to enter your public id# and Serial# of your Oasys once you submit it will let you know if another user is registered under that # if it is you will need them to transfer the registration if not then you should receive an email with the codes for each expansion.