Useless SD?!

Discussion relating to the Korg Electribe products.

Moderators: Sharp, X-Trade, Pepperpotty, karmathanever

Post Reply
Yahtef
Posts: 11
Joined: Thu Jan 08, 2015 7:48 am

Useless SD?!

Post by Yahtef »

Am i missing something, or is this new tribe absolutely useless with an sd card? There is no actuall function to SAVE?! I abhor computers, and now, also am beginning to despise korg. As well. It is an impending reality that this triffling junk is no hardware, and a computer is necessary, az it is merely an overpeiced piece of computer periphery.
Pickles tickle the taste buds while we illuminate the numinous.
neeth
Posts: 5
Joined: Tue Jan 13, 2015 8:40 am

Post by neeth »

Yes, you are missing something. You can save.
9. Memory card slot
This slot is where a memory card can be inserted. You can use
a memory card to save (write) or load (read) playback or data.


8. Using memory card
You can save the status of each setting to a memory card. You can
reinstall saved data by loading it.
Formatting
You need to format your memory card using the Electribe in order
to use a memory card.
You will lose all contents of a memory card when formatting
it.
Never turn off the power or remove the memory card
during this procedure.
1. Select the CARD FORMAT option from the DATA utility
menu.
2. Press the Menu/Enter button. Upon completion of the format
procedure, the display will indicate OK.
Saving to a memory card
1. Select the EXPORT PATTERN option from the DATA utility
menu.
2. Press the Menu/Enter button.
Loading from a memory card
1. Select the IMPORT PATTERN option from the DATA utility
menu.
2. Select the pattern data to be loaded with the Value knob.
Select a file from the folder by using the Value knob and enter
the folder by pressing the Menu/Enter button. To exit the
folder, select the “Upper Folder” with the Value knob and
press the Menu/Enter button to go back up one level.

Writing to a WAV file.
You can write patterns or a pattern set to a memory card.
Exporting a pattern to a WAV file
1. Select the EXPORT AUDIO option from the DATA utility
menu.
2. Select the format (WAV file only, or Ableton Live Set) to write.
3. Pressing the Menu/Enter button will export current pattern.
Exporting a pattern set to a WAV file
1. Select the EXPORT P.SET AUDIO option from the DATA
utility menu.
2. Select the format (WAV file only, or Ableton Live Set) to write.
3. Set a range of patterns recorded as pattern sets from 1 to 64 to
be written as a file.
TIP A longer time may be required if a wide range of pattern
sets is set to be written.
4. Pressing the Menu/Enter button exp
Post Reply

Return to “Korg Electribe”