Button problem

brickboo · Post by **brickboo** » Sat Feb 14, 2009 3:05 am

On my i30 the variation 4 button pushed in. Can someone advise me as to where I can acquire the necessary parts to fix it?
A friend on another forum that use to fix organs and keyboards is convinced that I can fix it my self. He's about talked me into trying.
I can't pay someone hyndreds of dollars to fix it right now.
Thanks a bunch for all of the help,
Boo Hargis

milo · Post by **milo** » Sat Feb 14, 2009 12:31 pm

hi,

Does the button still works? Have your i30 fallen down? What is the cause of the pushed button?

brickboo · Post by **brickboo** » Sun Feb 15, 2009 2:00 am

I just pushed the variation 4 button while playing live as I usually do and it just fell into the keyboard. I can see it. It's just about a half of an inch down inside the keyboard, but it's loose and just sitting there.
Thanks again for any help,
Boo Hargis

milo · Post by **milo** » Thu Feb 26, 2009 2:35 pm

hi,
srry for the late response.

I got on my xpro also 1 button that is a bit loose, but it is still working very good. I just let it, because it works still.

It is probably a little plastic thing under the button that is broken.

However i asked about fixing it. Some can do it by there own, and some just take it to the dealer. But i wouldn´t take the risk to make it by your own, because you have to take a lot of technical stuff loose to come by the button.

So if it still works, i recommend you just to leave it so. And a tip: Try to strike the buttons on the top and don't press to hard on it. Just a strike..

Byee

Douglas · Post by **Douglas** » Thu Mar 05, 2009 12:42 pm

milo wrote:hi,
srry for the late response.

I got on my xpro also 1 button that is a bit loose, but it is still working very good. I just let it, because it works still.

It is probably a little plastic thing under the button that is broken.

However i asked about fixing it. Some can do it by there own, and some just take it to the dealer. But i wouldn´t take the risk to make it by your own, because you have to take a lot of technical stuff loose to come by the button.

So if it still works, i recommend you just to leave it so. And a tip: Try to strike the buttons on the top and don't press to hard on it. Just a strike..

Byee

yes ,just leave it so.
maybe there's a big problem when disassemble it.