Can anyone help me program the soft switch to switch one program on and off?
I know it can be done, 'cause in BANK B COMBI#114 "PIPES & CHOIR SW', Realtime switch one is set to ctrl chg 80. and it turns the choir sound on and off, and leaves just the organ sound. I've been poring over the manuals, to no avail
Thanks
TOMMY
USING REALTIME SW 1 TO TURN OFF ONE PROGRAM IN COMBI MODE
Moderators: Sharp, X-Trade, Pepperpotty, karmathanever
-
nicmccafferty@hotmail.com
- Posts: 3
- Joined: Fri Dec 07, 2007 4:34 am
Sure 
In program mode, go to the 1 program you're trying to switch on/off (you may want to copy it to a different location, and then reference it correctly in your combi)..
In window 5.1 and 5.2 (amp settings) set your AMS to SW 1 and set the value below it to -100. SW1 should then effectively "mute" this single program.
Let me know how it goes
In program mode, go to the 1 program you're trying to switch on/off (you may want to copy it to a different location, and then reference it correctly in your combi)..
In window 5.1 and 5.2 (amp settings) set your AMS to SW 1 and set the value below it to -100. SW1 should then effectively "mute" this single program.
Let me know how it goes