Korg Forums

I really want to thank you, I did not remember that the other drum track styles I have done before were done in record style mode, I was focused on sequencer mode to make this and I was wrong... So thank you again (sorry for the late ^^) By the way, is that normal that in sequencer mode, if I record ...

Nobody did try ? ^^

Hello allz, I want to create a style with my own drum track. I create it in Sequencer mode, save it. I return to Style mode, Record, I press Menu then Import to add my drum file. Once saved, I go to Play mode and I get a blank measure before hearing the drum events. I checked Event Edit, there is ...

Split button ? ^^

This trick is only for mixer without stereo inputs =)

Insert inputs are for effect, these are like stereo jacks : a side for send the effect, the other for the effect return and the ground. You must plug the PA on track 5/6 or 7/8, 9/10... L and R are for stereo You can plug your PA on channel 1 & 2 and pan the 1 to far left and the 2 to far right, if ...

Jimi played his guitar with teeth, so... =)

You must Copy from Program in the drop down menu (top right corner) and select IFX all used for this program. If a program uses 10 IFX, you won't have additionnal slots for the next one, you'll have to go in IFX section and copy preset for the IFX that you need most =)

Tight enough, ok but is the keybed well fitted at the back ? Loosen the screws, put the unit on his back (connection side) and tight the screws. If squeaking remains, you must dismantle the fiberboard and see what is squeaking, it's easy to access =)

Same here, a lot more fluid =)

If possible, I'd let KORG repair it since it's only 6 months old. Yes, you can probably do it as suggested, but just my 2 cents, do it under warranty repair in case you have a problem in the future. The it's documented. That's what warranties are for. Good luck and sorry you're having a problem. I ...

Perhaps it's the same thing on original Kronos : Keybed is going to the front of the unit and make noises. Put your unit upside down, loose the screws that holds the keybed through the wooden board, they are slightly tiner than those all around the metallic shell. Put your unit on the back (the side ...

Hello, Remove all screws under the Kronos Remove the stripes that relies the keybed on the electronic boards Take care about metallic grey pieces, it's sharp ! Put the keybed upside down, pull the key that is broken slightly, it will move about 1 or 2 millimeters, it will click. Remove it from the ...

Yeah but each will be mono =)

Sorry but in 2015 we cannot support bad sound quality like this anymore =)