Piano sound

Keys.ss · Post by **Keys.ss** » Tue Jun 09, 2015 9:00 pm

Hi everyone, I'm not impressed with the factory piano sounds in the pa600... Would any one have better piano sounds?

Much appreciated....

Reuben · Post by **Reuben** » Tue Jun 09, 2015 10:11 pm

[##See Post on Page 2 for working links###]
I Agree with you on that one. Fortunately you can install a beautiful set of Steinway pianos for free in this set
https://www.dropbox.com/s/m79xyu991iorr ... T.zip?dl=0
The above set will work for the Pa3x/3xle/900/600. It contains 15mb of new samples of a Steinway and was provided generously by Antony Sharmann to Korg forum members.
You can read more about it in this link
http://www.korgforums.com/forum/phpBB2/ ... hp?t=96037

For Pa300 owners you can install a cut down version without the new samples but with some improvement on the factory pianos here

Edit: New Link https://drive.google.com/file/d/1ImZ3ME ... sp=sharing
Cheers,
John

Keys.ss · Post by **Keys.ss** » Wed Jun 10, 2015 8:47 pm

John thank you very much. I'll give this a try!

patrickmagongo · Post by **patrickmagongo** » Thu Jun 11, 2015 10:16 am

My advice would be to use soft 1 or soft 3 in your global settings velocities to the same sounds that u not happy with now. Again I can advice you to go and source sounds from each of your styles and save those in your user banks. Those already have the effects that contribute to sounding the styles.
Try also this plan of using Grand Piano or Grand piano RX in upper 1 and Smooth or tine EP in upper 2. Try mixing the pianos with Eps across. Please put search in this forum for pianos posts and reading across them you will find other useful points.I have learnt that people use Smooth tine in othe keyboards to brighten the piano and make heavy.

Keys.ss · Post by **Keys.ss** » Fri Jun 12, 2015 7:39 pm

Thanks..!

Keys.ss · Post by **Keys.ss** » Tue Jun 16, 2015 8:49 pm

Hi everyone, I tried to download these piano sounds one by one to specific locations. Two or three worked but the rest resulted in the error message "not enough space in PCM" ... any ideas how to solve this?

Thanks

Reuben · Post by **Reuben** » Wed Jun 17, 2015 3:16 am

The whole set only takes 15mb of PCM out of the 96mb you have available so you must have other PCM sounds loaded already. I'm not sure how it works on the Pa600 but on the Pa3x you can check available memory in Sound Mode by pressing the record button and looking at sampling information.
Cheers,
John

Thoraldus · Post by **Thoraldus** » Wed Jun 17, 2015 2:17 pm

Reuben wrote:The whole set only takes 15mb of PCM out of the 96mb you have available so you must have other PCM sounds loaded already. I'm not sure how it works on the Pa600 but on the Pa3x you can check available memory in Sound Mode by pressing the record button and looking at sampling information.
Cheers,
John

On the PA600 ... SOUND MODE > MENU > USER PCM SAMPLES

Keys.ss · Post by **Keys.ss** » Wed Jun 17, 2015 8:56 pm

Thanks....

Keys.ss · Post by **Keys.ss** » Wed Jun 17, 2015 8:58 pm

... I'm sure the answer to my next question is in the manual but since I'm logged in here, do u guys know if I can expand the PCM memory .. how and how much would be great!

Thanks again..

Thoraldus · Post by **Thoraldus** » Thu Jun 18, 2015 6:17 pm

Keys.ss wrote:... I'm sure the answer to my next question is in the manual but since I'm logged in here, do u guys know if I can expand the PCM memory .. how and how much would be great!

Thanks again..

Unfortunately, no.

ewart · Post by **ewart** » Mon Oct 12, 2015 5:11 am

Hi Guys,

The link for the PO300 does not work (404 error). Can something be done ?

Thanks & best regards
Ewart

Reuben · Post by **Reuben** » Mon Oct 12, 2015 10:06 pm

The Pa300 link has been fixed. It contains 8 modified pianos that will load to User 1 sounds. Don't forget to unzip the file first. You can unzip with Windows by right clicking and choose Open with.. File Explorer/Windows Explorer.
https://drive.google.com/file/d/1ImZ3ME ... sp=sharing
Cheers,
John

Amit.Sharma · Post by **Amit.Sharma** » Fri Jul 12, 2019 7:09 am

This link is not working is there any solution for downloading Steinway piano set for PA600?

Petrean Tabita · Post by **Petrean Tabita** » Fri Jul 12, 2019 8:19 pm

The link for pa600 piano doesn't work (404 error)

Korg Forums

Piano sound

Piano sound

The link is not working is there any solution ?