Audio Output Problems!!!!

Masi_music · Post by **Masi_music** » Sat Mar 01, 2014 4:56 am

Hey Guys!

I recently found an issue with my Audio Outputs L and R when I plug it into my Mixer or Audio Interface.

The Problem is that my "Gain level" on my mixer is at 0, and I still get sound through my monitors or speakers. If I turn my gain level up just up a notch my sound gets distorted. Its really bothering me, maybe i did something in my 3x settings.

I plugged my 3x in couple other mixers just to make sure I don't have a problem with my mixer or interface but its still the same. I don't like the sound thats coming from 3x to my speakers. Its distorted and has bad sound quality.

P.S. My wires are brand new nothing wrong with that either.

Masi

admar · Post by **admar** » Sat Mar 01, 2014 4:20 pm

Hi Masi,

The first thing that comes to mind is whether you have MAXX Audio amplify your signal too much?
(goto: Global > MAXX Master EQ > tab MAXX AUDIO; don't set the slider Volume too high)

admar

Masi_music · Post by **Masi_music** » Sat Mar 01, 2014 8:06 pm

But all the max Volume sliders are off and i still have this problem

karmathanever · Post by **karmathanever** » Sun Mar 02, 2014 12:49 am

Same from headphones plugged directly into the PA3X?

I would suggest that you perform a full PA3X reset using the "reset" download - at least to eliminate any OS issue.
Download here: http://www.korgpa.com/images/stories/sw ... s_v162.zip

Cheers

Pete

steve m · Post by **steve m** » Mon Mar 03, 2014 3:37 am

Sounds like you might be feeding the PA3X line outputs into Mic inputs instead of line inputs. That would add about 40dB of gain ( depending upon teh settings ) and cause just what you are describing.

Check that you have youir mixer / audio device set to line input level.