korg pa3x STS writing

tommark69 · Post by **tommark69** » Sat Mar 24, 2012 3:17 pm

Hi there, In pa3x I'm unable to write the performance settings to STS. While doing so, the message 'factory style protected' comes. Even if I change setting in 'Media' it happens when I switch on again. Please give a solution for this. Thanks

DonM · Post by **DonM** » Sat Mar 24, 2012 5:39 pm

You have to un-check the box to permit overwriting factory settings each time you power on the keyboard.
DonM

tommark69 · Post by **tommark69** » Sun Mar 25, 2012 2:26 pm

DonM wrote:You have to un-check the box to permit overwriting factory settings each time you power on the keyboard.
DonM

Thank you DonM. Is it possible to re-load the saved STS performances from external memory(USB memory stick) after un-checking the box to permit over writing?

DonM · Post by **DonM** » Sun Mar 25, 2012 4:33 pm

I don't know. Haven't tried this. My keyboard is at work so can't check.
DonM

Kerzwhile · Post by **Kerzwhile** » Wed Apr 25, 2012 3:39 pm

DonM wrote:You have to un-check the box to permit overwriting factory settings each time you power on the keyboard.
DonM

Same Problem here only, I Unchecked the Box and it still says write protected! ???

DonM · Post by **DonM** » Wed Apr 25, 2012 3:51 pm

Another option is to save the STS settings in a Songbook entry. You can do this without overwriting the Style.
DonM

steve m · Post by **steve m** » Thu Apr 26, 2012 10:02 pm

DonM wrote:Another option is to save the STS settings in a Songbook entry. You can do this without overwriting the Style.
DonM

If you can get it to work. SOMETIMES I have trouble writing STS to new songbook entries. The PA3X looks like it's saved the STS ok, but next time the song is selected it's back to the original style version of STS. Other times it works perfectly - same method, same key presses, same everything. At first I thought it was me and how I was doing it, but now I am sure this PA3X does some strange things from time to time.

LESSISMORE · Post by **LESSISMORE** » Sat May 05, 2012 11:08 pm

Hi Steve
there may be an undefined OS-bug, which is already on the PA2.
After saving an sts in the songbook, the written new sts-name will not appear in the display.
In this case you must reselect this sb-entry new.
Than the new written name of the new sts will appear in the display.
And the writing was successful.
When you had selected an other sb-entry, you would loose the written sts.

This mistake ist not shown every time. But sometimes and no one can say when it happens.
The shure way is to select the whole sb-entry new, after writing an sts.