Page 1 of 1
Help on stalling OS3.01
Posted: Mon Aug 23, 2010 9:12 pm
by jpostal
My PA1x was working fine under OS 3.00, but the forum recommended upgrading. I followed all the instructions, but after loading all four disks and reststarting, when I go to Disk Mode none of the tabs along the bottom including the utility tab necessary to load the Resources respond. I have tried reloading 3 times, and even created new OS 3.01 disks with the same results. Where do I go from here. By the way, I had difficulty creating the disks, having to try 2 or 3 times to get the exe files to create the disks.
Very frustrated from having a wonderful instrument to play to now having a dead one.
Posted: Tue Aug 24, 2010 1:23 am
by karmathanever
when I go to Disk Mode none of the tabs along the bottom including the utility tab necessary to load the Resources respond.
You MUST re-calibrate the touch screen immediately after installing the OS otherwise it is very likely that the screen will appear to not respond.
You can get to the calibration screen by pressing GLOBAL button and then pressing it again and holding it down.
Hope this helps
Pete
Thanks
Posted: Wed Aug 25, 2010 12:03 am
by jpostal
I just figured that out and it now it works perfectly
How to install PA1X os 3.01
Posted: Sun Aug 14, 2011 3:16 pm
by PA1X FAN
Hi there guys I just bought a korg pa1x and it has the original opeating system version from factory.I want to install the 3.01 OS and 3.00 resources.I made 4 floppys for OS and 6 floppys for musical resources.Is that all I need for it to work? I checked the floppys for OS disk 1 it has FD BOOT and PA1X_1.BIN files on it but Disk 2 and 3 and 4 it has only
PA1X_1.BIN file on them.Is this OK? I tried more copies on floppy still the same.
I need some help plz i just bought the thing and I dont want to mess it up.
PLZ Reply.Thank You
Posted: Mon Aug 15, 2011 6:09 am
by karmathanever
Sent you a PM
Pete
PA1X
Posted: Mon Aug 15, 2011 11:22 pm
by PA1X FAN
Thanks Pete
upgrading to OS 3.01
Posted: Wed Sep 21, 2011 1:45 pm
by keyboardmadness
I've just bought a Pa1xpro with OS 3.0.
Do you think it is worth/suggested upgrading to OS 3.01 ?? Which are the improvements ??
Thanks
Re: upgrading to OS 3.01
Posted: Tue Oct 18, 2011 3:21 am
by jim parkin
keyboardmadness wrote:I've just bought a Pa1xpro with OS 3.0.
Do you think it is worth/suggested upgrading to OS 3.01 ?? Which are the improvements ??
Thanks
Down load the operating manual for the 3.01 and read all about the updates.jim/p
Posted: Tue Oct 18, 2011 1:29 pm
by karmathanever
Do you think it is worth/suggested upgrading to OS 3.01 ??
100% YES !!!