Page 1 of 1

setting up the microKORG vocorder...?

Posted: Thu Dec 25, 2008 9:56 pm
by mryouronfire
so i just got my microkorg yesterday...

and i've read and reread the directions and i just don't seem to get it...

so what im kindly asking for is

a more detailed walkthrough on setting up the vocorder, please and thank you.

also, the

presets A84 and up under the vocorder don't seem to work at all.

furthermore, the Audio 1 in light does not light up at all, maybe a little flicker when i shift the switch over, but it does not turn on whatsoever...is this a problem?

thank you all!

Posted: Fri Dec 26, 2008 2:30 am
by toomanyKORGs
have you turned up the little black volume knob on the back right by the input?

Posted: Fri Dec 26, 2008 2:52 am
by mryouronfire
the audio 1 in volume? yes. it's all the way up to max.

Posted: Fri Dec 26, 2008 9:27 am
by toomanyKORGs
hmm, im not sure how to diagnose your problem..

when youre on a vocoder program the lights turn green right?

and are you using the included mic?

im sure you already know this but you also must press a key to hear any sound as you are talking through the mic/playing audio in.

Posted: Fri Dec 26, 2008 11:38 am
by Xenomorph
I also can't think of his problem. It's usually the simple stuff that gets overlooked and many don't know you have to press a key while talking thru the mic, that would be my guess. Keep us in the loop regarding any results, good luck.

Posted: Fri Dec 26, 2008 6:36 pm
by mryouronfire
i actually think it could be the actual microphone...

after all, this korg WAS bought as open box from display...

also, i tried hooking up an mp3 player to the korg with an audio cable.

immediately, the audio 1 lights started flashing, and when i pressed a key,

you could faintly hear what was playing on the mp3...

what does that tell me...

Posted: Fri Dec 26, 2008 11:47 pm
by travisthered
under "audio in 1" on the back, try adjusting the "volume 1" and make sure the toggle is set to "mic" not "line".

hope it helps.