help here triton taktile midi out

New members are strongly recommended to use this section to introduce themselves, and to view our online introduction.

Moderators: Sharp, X-Trade, Pepperpotty, karmathanever

Post Reply
huesx
Posts: 1
Joined: Sat Oct 19, 2019 5:22 pm

help here triton taktile midi out

Post by huesx »

hi everyone :) hope you can help me here.. I have a problem with my Triton Taktile 49 trying to integrate it with another midi controller I have (maschine mk3) or also trying to integrating it with my audio interface tascam us 1800.

The thing is that I don't have enough usb ports available on my computer, so I thought that I could use the Triton Taktile midi out connector to the maschine or the tascam midi in conenctor, and my Triton Taktile power supplied directly from external power source, but no midi signal received.

How can I solved that? I want my triton taktile and my other equipment working together.

Hope you can help me.

BR, HUESX
Top
voip
Platinum Member
Posts: 4016
Joined: Thu Nov 27, 2014 2:07 pm

Post by voip »

According to the user manual, the Triton Taktile MIDI connector is for MIDI in only, not MIDI out. However, the Parameter Guide suggests that MIDI routing in the Global parameters needs to be set to "Controller In/Out" for the DIN MIDI port to send MIDI messages. If it is set to USB-MIDI Interface, then the MIDI messages will be sent via USB.

A powered USB hub could be employed to provide usable extra USB ports.

.
Top
Post Reply

Return to “New Members Zone”