Problem report - NEXT-V3.1.0 ONLY (NO WISH-LISTS!!!!)

A.R · Post by **A.R** » Sun Jul 28, 2019 10:53 pm

On pa4x 76 oriental i can not select ram on OSC!!! sample is al ready saved to hard disk and also write. but on write i can not select a slot for sample to!!! what is wrong korg.

B.Safe · Post by **B.Safe** » Tue Jul 30, 2019 8:09 pm

A.R wrote:On pa4x 76 oriental i can not select ram on OSC!!! sample is al ready saved to hard disk and also write. but on write i can not select a slot for sample to!!! what is wrong korg.

Have you created a multisample ? only multisamples can be assigned to an OSC, not samples.

korg1 · Post by **korg1** » Sat Aug 10, 2019 7:48 am

Didn't had time to dig into this more but i noticed that while using some guitar sounds like ''power chords1'' in style edit mode,some of their notes sound like percussive during playback of what is recorded,while other notes sound normal.
No Rx notes were recorded,only normal notes,but playback was like a perc instrument was playing on most notes,while some were playing the actual guitar sound.
It sounds normal after saving and playing the style though.
Not sure if this is bug or caused by something else,i will check it when i find some time.

Divine Sounds · Post by **Divine Sounds** » Fri Aug 16, 2019 11:05 pm

PA4X OS 3.1.0
Is there anybody have problem selecting tones from last page of each section for style editing. I can't select sounds from the last page of Ethnic group for my styles!!

karmathanever · Post by **karmathanever** » Sat Aug 17, 2019 9:59 am

PA4X OS 3.1.0
Is there anybody have problem selecting tones from last page of each section for style editing. I can't select sounds from the last page of Ethnic group for my styles!!

No problem on my PA4X
Did you perform the complete update (incl "factory restore" step)?

Cheers

Pete

P.S. Welcome to the forums

rikkisbears · Post by **rikkisbears** » Wed Aug 21, 2019 11:53 pm

Hi ,
I was editing one of my user styles, saved it exited to try it out, when I tried edit it again, couldn’t get back in. Problem was solved after I switched off machine and turned it back on.

Maybe just a one off glitch, report back if it happens again.

korg1 · Post by **korg1** » Sat Aug 24, 2019 10:49 pm

Not sure if this a bug or it is supposed to work like that,but :

If you chose AUDIO OUT ----->OUT1+2, the mp3player's volume can be adjust using the volume on the screen at mp3/speakers tab,either using the MP3 VOL slider,right ?

But if you assign MASTER VOLUME at ASSIGN.B sliders for example,then the slider will control both Master Volume of LEFT,RIGHT plus OUT1&2.

Why does this happen since MP3 Vol is already assigned at it's own slider?
The assign B. slider should control the overall volume of LEFT+RIGHT only in my opinion,since Master Volume Knob doesn't control Out1+2 outputs.

Rebwar · Post by **Rebwar** » Mon Aug 26, 2019 10:55 am

Hi everyone, i have Korg pa4x oriental with the newest version 3,1, my question is how much is the MS places is available for maximum in the version 3 next, i have my sets is just 429 mb but my ms is full already .
Best regard

karmathanever · Post by **karmathanever** » Mon Aug 26, 2019 12:55 pm

Hi everyone, i have Korg pa4x oriental with the newest version 3,1, my question is how much is the MS places is available for maximum in the version 3 next, i have my sets is just 429 mb but my ms is full already .
Best regard

This is a problem/bug report topic - please repost this as a new topic

Thanks
Pete

korgpask · Post by **korgpask** » Fri Sep 27, 2019 8:47 am

1. Problem with IMPORT SF2 Bank

Unable to load some.

link SF2 file for TEST:

http://www.korgpa.sk/forums/sf2/Guitar_ ... ee_Wee.sf2

korgpask · Post by **korgpask** » Fri Sep 27, 2019 8:54 am

Problem 2: SF2 import bank:

Inserted samples are only L - left channel. Right channel wav is missing !!!!
Right channel wav sample not loaded !!!

file SF2 for test :
http://www.korgpa.sk/forums/sf2/Fantasia.sf2

pawlikp100 · Post by **pawlikp100** » Sat Sep 28, 2019 9:57 am

Hi I found Next very serious bug which does not allow you to record your own songs with using Sequence.
Go to the Sequencer then, push Record button and next choose new song. Try to record anything. To start recording you have to push start/stop button. In my case the procedure does not work. I can't hear recount. The process doesn't start.
Please let me know if you encounter the same problem.
My OS 3.1.0. Musikan version.

pawlikp100 · Post by **pawlikp100** » Sun Sep 29, 2019 12:25 pm

pawlikp100 wrote:Hi I found Next very serious bug which does not allow you to record your own songs with using Sequence.
Go to the Sequencer then, push Record button and next choose new song. Try to record anything. To start recording you have to push start/stop button. In my case the procedure does not work. I can't hear recount. The process doesn't start.
Please let me know if you encounter the same problem.
My OS 3.1.0. Musikan version.

I call off the above. To start recording you need to push the play button from the player 1 section not start/stop

korgpask · Post by **korgpask** » Mon Sep 30, 2019 8:07 am

I'm sorry but SF2 sound banks can't be used.
1 problem: SF2 banks - voice cannot be imported in general
2 problem: SF2 does not load correctly and therefore cannot be used.

pawlikp100 · Post by **pawlikp100** » Tue Oct 08, 2019 10:01 am

Hi, I have found the bug (Korg pa4x Musikant)
It affects users utilizing EC5 controller. When you program pads 1 to 4 that control panel buttons with the same name.
The controller does not respond (pads are not on/off)

Korg Forums

Problem report - NEXT-V3.1.0 ONLY (NO WISH-LISTS!!!!)

Cannot select sounds for styles !!!

MS

SF2 Problem with IMPORT SF2 Bank

SF2 import ONLY L chanel !!! R missing

SF2 problem 2x