download patch: http://cycling74.com/toolbox/emix-the-electribe-editor/
Max runtime (to run the patch, links in the upper right of the page): http://cycling74.com/downloads/
EMiX is an editor for the Electribe MX. current features are:
-sync with current selected pattern through SYSEX
-real-time sync of all the EMX settings through RNPN/CC (excluding step edit, song mode, and a few lesser used settings)
-save/load curent state to presets (the matrix of white dots close to the midi interface selection)
-"main volume" moving proportionally all the individual volumes (not linked to the master volume on the EMX)
-Audio VU-meter for mixing purposes
-entirely customizable/open source patch for Max users
Quickstart guide:
1) select your midi/audio interfaces in the lower right part
2) select the pattern you wish to sync on the EMX and hit the "sync current pattern" button ONLY ONCE.
3) wait a few seconds so all the message are received, you're done syncing! Now you can do anything.
*WARNING*
nothing is saved on the EMX until you hit the WRITE button on the EMX. Because EMiX is at a early development stage, there can be errors when translating the midi/sysex messages. You should in a first time use the preset matrix (in the midi interface selection section) and only save it when you are sure everything is properly edited.
