Problem conect midi cable

Discussion relating to the Korg Triton Studio.

Moderators: Sharp, X-Trade, Pepperpotty, karmathanever

Post Reply
olsian
Posts: 28
Joined: Sat Jul 26, 2008 11:21 am

Problem conect midi cable

Post by olsian »

Please may help me. I want to conect triton studio to casio cz 101 with midi cable. I put ch 01 in triton and ch 01 t=in casio but when play to casio cz sounds of triton mu triton studio freeze has not sounds. how to conect the keyboard
User avatar
Hanon_CTS
Full Member
Posts: 247
Joined: Tue Jun 14, 2011 1:13 pm

Re: Problem conect midi cable

Post by Hanon_CTS »

olsian wrote:Please may help me. I want to conect triton studio to casio cz 101 with midi cable. I put ch 01 in triton and ch 01 t=in casio but when play to casio cz sounds of triton mu triton studio freeze has not sounds. how to conect the keyboard
Hello Olsian,
Welcome to the forum!

Casio CZ101 Midi Out connected to Korg Triton Studio MIDI In
Both units on same MIDI channel.
This should work without problems.

I would check to make sure that you have an actual midi cable rather than a 5 pin din cable like that is used for the old computer keyboard.
These look the same but the ground is connected on both ends and have been reported to cause problems.

Cheers, Hanon
I used to play Korg instruments, then I took an arrow to the knee.
olsian
Posts: 28
Joined: Sat Jul 26, 2008 11:21 am

thanks

Post by olsian »

thanksssssssss
Post Reply

Return to “Korg Triton Studio”