Need some help with my EMX-SD

Zemata · Post by **Zemata** » Sat Jan 29, 2011 6:45 am

So I know how to look through all the drum PCMs. Just hit part edit, up to wave, hit my drum part, and just turn the dial to the drum part I like. But I'm going through the instructions and it shows a list of synth PCMs as well.

When I have my synth part selected, It only allows me to change the waveform. How do I find the list of synth sounds?

Aciphecs · Post by **Aciphecs** » Sat Jan 29, 2011 5:25 pm

I think you maybe need to use the keyboard function to get the parts to sound the way you want.

Choose one of the two "Keyboars parts" and pick a sample from 130(clav)-156(powerchrd) acording to the manual. Now press the "Keyboard" button. Use the 16 step keys at the bottom as keys of a keyboard to play the sample over. These samples are set with loop points, so when a key is held, the note is held. Like a synth

Step key 4 is middle C.

I hope this is what you were looking for.

Zemata · Post by **Zemata** » Sat Jan 29, 2011 6:28 pm

I don't quite understand what you mean. What two keyboard parts? I just want to know how to look through the preset synth sounds. There are drum ones and I can look through them just fine. They match the list in the instructions P.39 but on P.40 there's a list of synth sounds and I don't know how to get to those. I can only seem to change the waveform (Saw, Pulse, Triangle, Sine) when I have "PART EDIT" selected and have one of my five synth sounds selected.

Eat-Static · Post by **Eat-Static** » Sat Jan 29, 2011 8:01 pm

Hi ,

Select a Synth Part , turn the SYNTH OSCILLATOR KNOB to PCM+COMB or PCM+WS and you can then scroll thru the PCM synth list .
Enjoy

Eat-Static

Zemata · Post by **Zemata** » Sat Jan 29, 2011 9:43 pm

Yes thank you! That solved my issue.

Aciphecs · Post by **Aciphecs** » Sun Jan 30, 2011 1:43 pm

I was thinking you were using the ESX. Sorrry about that