Kaoss Pad 3 Noob

YOBREKCALS · Post by **YOBREKCALS** » Tue Jun 23, 2009 8:09 pm

I use a mobile pre usb in box, which outs to two krk monitors. I want all output from my computer to transmit through the kaoss pad so i can effect it. I use Ableton Live 7. What cords do I need to run into what to make this happen? Thanks

salamanderanagram · Post by **salamanderanagram** » Wed Jun 24, 2009 5:55 am

you need cord to run from your USB box to your kp3, and from your kp3 to your speakers. probably you should have a mixer in there but you can go without.

look at the jacks on the back of each device. it should be pretty freaking obvious what sort of cable you need. for example, your USB box probably has 1/4 outputs and the kp3 has rca inputs.

obviously you need a cable that goes from 1/4 to rca. use your common sense.

Symbiot · Post by **Symbiot** » Wed Jul 22, 2009 10:39 pm

salamanderanagram wrote:you need cord to run from your USB box to your kp3, and from your kp3 to your speakers. probably you should have a mixer in there but you can go without.

look at the jacks on the back of each device. it should be pretty freaking obvious what sort of cable you need. for example, your USB box probably has 1/4 outputs and the kp3 has rca inputs.

obviously you need a cable that goes from 1/4 to rca. use your common sense.

I'm sure you mean well, but being a prick while someone is asking for help isn't cool.

Is it really that hard to say "you'll need an rca to 1/4 adapter"?

salamanderanagram · Post by **salamanderanagram** » Thu Jul 23, 2009 12:06 am

"Is it really that hard to say "you'll need an rca to 1/4 adapter"? "

is that not what i said? when i say 'use your common sense', i'm serious! it's really pretty obvious.