M3 and General MIDI

Atuksa · Post by **Atuksa** » Thu Feb 07, 2008 11:52 am

How can I set standard GM or XG set for MIDI files loaded via USB to sequencer? Thank You for help.

Twiddler · Post by **Twiddler** » Thu Feb 07, 2008 4:20 pm

Have you tried this:

http://www.karma-lab.com/forum/showthre ... adid=11408

Atuksa · Post by **Atuksa** » Sat Feb 09, 2008 9:52 am

I have tried it, but after GM initialising the sounds are not General Midi. There is an other problem also: when I load new song from USB, the GM setting (this bad setting) changes. I thing, the M3 is not able to playing GM songs right in sequence like in Pa or other keyboards. (Sorry for my bad English)

klarnet basowy · Post by **klarnet basowy** » Sat Feb 09, 2008 7:29 pm

You need also to set sound map to GM, I think it's in the Global settings

Atuksa · Post by **Atuksa** » Thu Feb 14, 2008 9:38 am

Anybody used GM on M3? This settings above not helps. On Pa800 no problems, on M3 I thing You need set manualy the voices.

alogie · Post by **alogie** » Thu Feb 14, 2008 1:43 pm

Atuksa wrote:Anybody used GM on M3? This settings above not helps. On Pa800 no problems, on M3 I thing You need set manualy the voices.

Go to Global P0: Basic Setup and select the System Pref. tab. Change the Bank Map from Korg to GM(2). That worked for me. Don't forget to Write Global Setting if you want to save it that way.

Atuksa · Post by **Atuksa** » Fri Feb 22, 2008 7:49 am

Thank You, it works. Writing the global settings missed.