Well, after switching the Kingston to the back slot and Factory to the front (Closest to the keybed) I have the exact behavior.
The only cure is to keep loading the PCG and KGE files. I don't know much about all this, but it does seen like a memory problem.
Perhaps the 1.3 update is to large for the 2g to run smooth. Just a thought?
If that isn't it, I sure hope there is a fix coming down the pike. My Oasys ran like grease before the update and now it's runs like a sick puppy.
Copying Combi to Sequence Error!?!
Moderators: Sharp, X-Trade, Pepperpotty, karmathanever
-
JoeJack101
- Junior Member
- Posts: 50
- Joined: Wed Apr 11, 2007 7:47 pm
OS Error
Come to think of it, I DID just update the operating system. And before I updated the OS I NEVER had this problem. I hope Korg is aware of this problem. For $8,499.00 there should not be ANY problems that I have to deal with on this thing...
Combis into SEQ errors
Hi Guys
I have posted similar problems with my Oasys at Karma-labs forum. Using auto-load to get a Combi into the Sequencer, the timbre/tracks don't drop into REC as they should, all the FX disapear, levels change, I sometimes hear piano when I should be hearing guitar, pressing LOCATE locks everything up for a while, the recorded song timbres and Karma sound different to the song I actually played.
I have tried swapping RAM sticks around as someone suggested but it made things even worse. I found yesterday that loading the factory demo songs in before I start recording my own songs seems to make things better but not perfect. ( can someone else try this and report back )
There appears to be an issue with how the O/S 1.3 interacts with some of the hardware. Has anyone actually had Korg confirm/deny these problems yet ?
I know that some people have found there own fixes, and I know that their fixes don't always work for others. How do we go about getting a final solution to this problem ? Did V1.2.2 have these SEQ problems ? I don't know cos I came straight in at 1.3.
If anyone from Korg can comment on whether this is a confirmed bug or just something that we are expected to live with, it would be appreciated.
I for one can't live with it permanently, for the money I paid for Oasys, rightly or wrongly I expected more.
I have posted similar problems with my Oasys at Karma-labs forum. Using auto-load to get a Combi into the Sequencer, the timbre/tracks don't drop into REC as they should, all the FX disapear, levels change, I sometimes hear piano when I should be hearing guitar, pressing LOCATE locks everything up for a while, the recorded song timbres and Karma sound different to the song I actually played.
I have tried swapping RAM sticks around as someone suggested but it made things even worse. I found yesterday that loading the factory demo songs in before I start recording my own songs seems to make things better but not perfect. ( can someone else try this and report back )
There appears to be an issue with how the O/S 1.3 interacts with some of the hardware. Has anyone actually had Korg confirm/deny these problems yet ?
I know that some people have found there own fixes, and I know that their fixes don't always work for others. How do we go about getting a final solution to this problem ? Did V1.2.2 have these SEQ problems ? I don't know cos I came straight in at 1.3.
If anyone from Korg can comment on whether this is a confirmed bug or just something that we are expected to live with, it would be appreciated.
I for one can't live with it permanently, for the money I paid for Oasys, rightly or wrongly I expected more.
Steve M
Kurzweil K2000, Yamaha CS1X, Minimoog, Oasys76, GEM Promega 3, Korg PA3X, Kurzweil PC3K8
Too many toys are never enough!
Kurzweil K2000, Yamaha CS1X, Minimoog, Oasys76, GEM Promega 3, Korg PA3X, Kurzweil PC3K8
Too many toys are never enough!