Pulse Width Knob On 1st VCO Stops @ 70%
Posted: Tue Jul 23, 2013 9:22 pm
Hello All,
Just received my MS-20 Mini. Besides obvious noise issues (esp. on the triangle wave / with LPF and no Peak), I'm enjoying it.
However, I noticed that when I set the first VCO to Pulse Width, the Wave From knob cuts from a narrow pulse, to nothing, at around 70% turned clockwise, or the 7th tick.
Now, I know that the sound will eventually cut out, as the ratio of the pulse becomes 0:100, but I thought I would have control through the pot's range.
Is my unit faulty, or is this characteristic of all Mini's / original.
Curious, as it makes manual PWM more difficult, having to be conscious of not crossing the 70% line, or else, the VCO disappears.
Thanks all!
Just received my MS-20 Mini. Besides obvious noise issues (esp. on the triangle wave / with LPF and no Peak), I'm enjoying it.
However, I noticed that when I set the first VCO to Pulse Width, the Wave From knob cuts from a narrow pulse, to nothing, at around 70% turned clockwise, or the 7th tick.
Now, I know that the sound will eventually cut out, as the ratio of the pulse becomes 0:100, but I thought I would have control through the pot's range.
Is my unit faulty, or is this characteristic of all Mini's / original.
Curious, as it makes manual PWM more difficult, having to be conscious of not crossing the 70% line, or else, the VCO disappears.
Thanks all!