Hi all,
I am trying to copy some user sounds from one set to another, I don't mean merging sets.
Is there any software out there to do so? I tried loading my favorite sounds into the set that I am using the most, I could load a few and then I couldn't load the rest due to " there is not enough pcm memory " issue.
I wish there is another way to do that.
Thanks!
Moebrand
Is there a software for copying user sounds ?
Moderators: Sharp, X-Trade, Pepperpotty, karmathanever
Is there a software for copying user sounds ?
Moebrand
Korg PA1000,
DSR Ram singh 13Scale changer with 4 sets of Custom reeds Harmonium
Bina #32 13 scale changer Harmonium with 4 sets of English reeds
Apple iMac 480GB SSD , 12GB DDR3 Ram,
logic Pro X , Studio One 3.
Dell laptop with 500GB ssd and 8GB Ram , Korg Pa Manager V5
FL Studio 11 Producer Edition
Studio One 6 Artist
Allan & Heath Zedi 10FX mixer
Shure SM7DB Microphone
SE Electronic V7 microphone
Rode NT1A condenser microphone
Audio Technica in ear studio monitor headphones
Korg PA1000,
DSR Ram singh 13Scale changer with 4 sets of Custom reeds Harmonium
Bina #32 13 scale changer Harmonium with 4 sets of English reeds
Apple iMac 480GB SSD , 12GB DDR3 Ram,
logic Pro X , Studio One 3.
Dell laptop with 500GB ssd and 8GB Ram , Korg Pa Manager V5
FL Studio 11 Producer Edition
Studio One 6 Artist
Allan & Heath Zedi 10FX mixer
Shure SM7DB Microphone
SE Electronic V7 microphone
Rode NT1A condenser microphone
Audio Technica in ear studio monitor headphones
- BasariStudios
- Approved Merchant
- Posts: 6511
- Joined: Sun May 29, 2005 4:56 am
- Location: NYC, USA
- Contact:
Hi Moe, thats becuse you running out of RAM memory on the synth and no
software will help you, you have to start cleaning up some TRASH Samples
in the synth before you can load new Sounds...and i dont mean the PCGs
that you see in Program Mode but i mean Samples in Record Mode.
software will help you, you have to start cleaning up some TRASH Samples
in the synth before you can load new Sounds...and i dont mean the PCGs
that you see in Program Mode but i mean Samples in Record Mode.
http://www.basaristudios.com
Cubase 8.5 Pro. Windows 7 X64. ASUS SaberTooth X99. Intel I7 5820K. ASUS GTX 960 Strix OC 2GB. 4x8 GB G.SKILL.
2 850 PRO 256GB SSDs. 1 850 EVO 1TB SSD. Acustica: Nebula Server 3 Ultimate, Murano, Magenta 3, Navy, Titanium.
Cubase 8.5 Pro. Windows 7 X64. ASUS SaberTooth X99. Intel I7 5820K. ASUS GTX 960 Strix OC 2GB. 4x8 GB G.SKILL.
2 850 PRO 256GB SSDs. 1 850 EVO 1TB SSD. Acustica: Nebula Server 3 Ultimate, Murano, Magenta 3, Navy, Titanium.
- LESSISMORE
- Platinum Member
- Posts: 531
- Joined: Wed Jul 15, 2009 8:37 pm
- Location: Germany
Hi Moebrand
Deleting old, never wanted user-samples:
1. Media/save/SSD-S-ALL.Set to HDD or Disk(Named Old1.Set, and tick all boxes, including PCM)
2. Now Media/erase all not wanted Sounds/PCGs in SSD-S/ALL/Sound
3. Media/save/SSD-S-ALL.Set to HDD or Disk(Named Old2.Set, and tick all boxes, including PCM)
4. Now go to sample-mode and delete all Samples from Ram.
5. And now you can Media/Load the Old2.Set
6. Media/save/SSD-S-ALL to Clean1.set
Your key will only load pcms which are linked to a pcg.
So all other (ram) samples will not be loaded.
You cannot delete factory-samples. They are rom-samples.
Deleting old, never wanted user-samples:
1. Media/save/SSD-S-ALL.Set to HDD or Disk(Named Old1.Set, and tick all boxes, including PCM)
2. Now Media/erase all not wanted Sounds/PCGs in SSD-S/ALL/Sound
3. Media/save/SSD-S-ALL.Set to HDD or Disk(Named Old2.Set, and tick all boxes, including PCM)
4. Now go to sample-mode and delete all Samples from Ram.
5. And now you can Media/Load the Old2.Set
6. Media/save/SSD-S-ALL to Clean1.set
Your key will only load pcms which are linked to a pcg.
So all other (ram) samples will not be loaded.
You cannot delete factory-samples. They are rom-samples.
Hi!
I am on the same page, but have a slightly different question, let's say you have got a drumkit which is made of samples ONLY samples, and in a rythm only 3 samples are used of this drum kit, will the " delete all unassigned ... " from Record mode delete ALL the samples that are not used in a rythm or in a sound, but just being there in case you want to use them in the future? What i mean is, will I end up with a drum kit with only 3 samples functioning and the rest will be erased?
I am on the same page, but have a slightly different question, let's say you have got a drumkit which is made of samples ONLY samples, and in a rythm only 3 samples are used of this drum kit, will the " delete all unassigned ... " from Record mode delete ALL the samples that are not used in a rythm or in a sound, but just being there in case you want to use them in the future? What i mean is, will I end up with a drum kit with only 3 samples functioning and the rest will be erased?
- BasariStudios
- Approved Merchant
- Posts: 6511
- Joined: Sun May 29, 2005 4:56 am
- Location: NYC, USA
- Contact:
No they wont, if they are assigned to the DrumKit, Unisigned means
ONLY to Sounds and DKs but not Styles, that doesnt matter.
ONLY to Sounds and DKs but not Styles, that doesnt matter.
http://www.basaristudios.com
Cubase 8.5 Pro. Windows 7 X64. ASUS SaberTooth X99. Intel I7 5820K. ASUS GTX 960 Strix OC 2GB. 4x8 GB G.SKILL.
2 850 PRO 256GB SSDs. 1 850 EVO 1TB SSD. Acustica: Nebula Server 3 Ultimate, Murano, Magenta 3, Navy, Titanium.
Cubase 8.5 Pro. Windows 7 X64. ASUS SaberTooth X99. Intel I7 5820K. ASUS GTX 960 Strix OC 2GB. 4x8 GB G.SKILL.
2 850 PRO 256GB SSDs. 1 850 EVO 1TB SSD. Acustica: Nebula Server 3 Ultimate, Murano, Magenta 3, Navy, Titanium.