Korg Forums

hi...i'd like to know if it is possible to convert some sounds that i have in my prophecy to the trinity plus...
IS any way to transfer a whole bank??i've tried to do midi dump from prophecy to trinity but...with no results...i have the 2.20 version of operating system in trinity...do i need the 2.41 for that??

I also tried to do it with a different method:i converted some sounds of the prophecy to sysex with progenie....i couldn't find a way to transfer those sounds to trinity plus....


...any idea???thanks...

Have a look at your SOLO board manual.

You can Sysex Dump the Prophecy files straight into your SOLO board.

Regards.
Sharp.

i don't have this manual.....can anyone help me??or send me this manual ro the page i need at t.stergios@yahoo.gr


...thanks...

musictech wrote:i don't have this manual.....can anyone help me??or send me this manual ro the page i need at t.stergios@yahoo.gr


...thanks...

The Solo-TRI manual can be found in this download bundle:

http://www.korgforums.com/forum/phpBB2/ ... 458#239458

It's all of the known Trinity manuals together, in one bundle.

If you have really slow internet I can put just the SOLO-TRI manual online for you, at request.

Unfortunately I don't have a Prophecy manual, but it can be found on the UK Korg Support website (for free): http://www.korguksupport.co.uk/

Go to Downloads > Synthesizers > Prophecy

I remember i did it once a long time ago. If i remember correctly, i had to do it one program at a time. So, you select a prog number on the trinity and send the sysex dump from the Prophecy patch you want to transfer. You then save the patch in the Trinity and select a new one and start again.

Blink

P.S. Don't forget to deselect the sysex filter in the Trinity Global page. God, i miss my Trinity!!!

i did all these but,,...nothing...!
i haven't managed yet to do it.....any suggestion please?

Mmm, i must state the obvious but just in case...The program location you select on the Trinity before the dump from the Prophecy must be in the S bank. I guess you thought of it but just in case!!! Should work.

i did it....but in the prophecy i have only the option to transfer from prophecy to the bank A or the B of the other synth..


Any suggestion?

The plus has the 2.20 os version and not the 2.41...is it a problem??


when i do the midi dump i select the bank s from plus....then i tried also to press the ''record/write'' button of the plus ,so the sound could be saved ....
Any suggestion....PLEEASSSEEE..!!!??????

You should be able to dump(Sysex data dump) the current program in the Prophecy. All Korg synth for the last 12 years can do that....

Blink

i've done a lot of dumps.....the problem is that i can not transfer sounds from prophesy to trinity.....

musictech, Sharp, Timo, BlinkofanI and everyone:

This will dump Individual Prophecy Patches to the edit buffer of the Trinity Plus.

On the Prophecy set

Global Page

8: Global Ch 1 Local On Omni Off Clock INT
12: Program Change xmt on rcv on
13: Prog Bank Select:
set A, B and Card to LSB 002 MSB 00
(this matches the S bank on Trinity)
15: Sysex XMT On Rcv Enable


On the Trinity set

Global P1 Midi Ch 1 Local 1 Midi Clock INT
Global P2 Filter Enable Exclusive All others checked

Connect Prophecy MIDI OUT to Trinity MIDI IN
Connect Trinity MIDI OUT to Prophecy MIDI IN

Select Trinity Program S Bank

Use the Prophecy to change patches.

The current Prophecy patch is sent to the Trinity's edit buffer and touch-screen.

Save the patch in a location on the Trinity.

Play two-handed solos with both synths....I am!

Sam

p.s. Dear Sharp: Please move this to the Classic section of the boards...

Thank you SOOOOOO much for this step-by-step information!
I was able to successfully dump my personal sounds from the
Korg Prophecy to the Trinity S-Bank! YOU ROCK!!!!!!!
Rik