volume

BADMANN · Post by **BADMANN** » Thu Apr 24, 2008 2:05 pm

is it possible to change the volume of a track set to the same midi channel as another track with having them both change? sometimes i combine sounds by setting them to the same channel but when i want to maybe adjust the volume of on they all get affected?

EJ2 · Post by **EJ2** » Thu Apr 24, 2008 2:30 pm

Yes. Each timbre or track has its own independent volume regardless of MIDI channel. For example, you could have two different drum programs (one in timbre slot 4 and another in slot 5) being controlled by KARMA Module A using GE 1852 assigned to MIDI channel 3. You can set your volumes from the "Prog Select/Mixer" tab in any combi. As an example of that, take a look at Combi A 10 Drawbars for Upper Funk. Notice all the different drum programs and their different volumes. Now go to the KARMA tab. Here you can see that Module B is set to MIDI channel 3 for timbres 5 through 12, yet their volumes are not the same (as shown in the Prog Select/Mixer tab).

Welcome to the wonderful

world of OASYS programming.

Cheers,
Eric