Page 1 of 1

Sycning Monologue to Disaster Area micro.clock

Posted: Fri Feb 17, 2023 9:35 am
by gary_francis
Hi Folks

Hopefully someone can help me before I throw both of these devices out the window.

I purchased a Disaster Area micro.clock with the intention of using it to set the BPM for the monologue sequencer so I can use it in a live setup.

https://www.disasterareadesigns.com/shop/p/micro-clock

The micro.clock has the ability to send control voltage so this was the first thing I tried. I connected the micro.clock to the monologue sync in port but wasn't having any luck.

The micro.clock has the ability to send midi clock out to a connected device so this was my next approach. I believe I have all the settings on the monologue set correctly as per user manual and I'm connected using a TRS cable out of the micro.clock multijack output and a midi cable into the midi in of the monolgue. All settings for the micro.clock applied as per their instructions but it no worky i.e. changing the tempo on the micro.clock has no affect on the monologue.

Anyone any experience or tips to try here?

Many thanks in advance

Gary

Posted: Tue Apr 11, 2023 6:08 am
by synthpeter
A bit late to the party, but maybe others run into the same issue.

There are two different configurations for TRS to MIDI. Could be the wrong adapter is used.