Page 1 of 1
Plugging an electric guitar in the kross
Posted: Thu Mar 10, 2022 12:00 am
by Alhall
Hi, do you need a preamp to plug an electric guitar and record some audio parts ? Can you apply effects to the guitar. Thx
Alain new user of the Kross
Posted: Thu Mar 10, 2022 11:49 am
by voip
Guitars with passive pickups will require a preamp, those with active pickups will not. The Kross' effects can be applied to the guitar. The Audio In button needs to be lit, and the audio quick settings can be accessed by holding down the EXIT button and pressing the AUDIO In button. Use a Program or Combi as the place to route, create and adjust the effects.
.
Posted: Thu Mar 10, 2022 12:13 pm
by Alhall
voip wrote:Guitars with passive pickups will require a preamp, those with active pickups will not. The Kross' effects can be applied to the guitar.
.
Merci !
Posted: Thu Mar 10, 2022 12:20 pm
by voip
This video illustrates the Kross effects being used on a guitar, but it doesn't go into any detail about setting up, apart from superimposing the effects used on the video:
https://www.youtube.com/watch?v=mnY7jlvBEIc
.
Posted: Thu Mar 10, 2022 1:20 pm
by Alhall
Thanx a lot !
Posted: Thu Mar 10, 2022 3:15 pm
by Koekepan
Just for the record, many multi-effects pedals with amp simulations in them will do a fine job for little money. For me, the Zoom G3n is a go-to.