MS2000 Freeze Problem When Insert/Remove Audio Jack
Posted: Sat Feb 15, 2020 8:45 am
Hi everyone. I have a problem with my MS2000. It works with all the functions. However, when i remove and insert the the while it’s powered on, the audio is gone and it starts kind of freezing. The buttons reacts with 4-5 secs delay. At first, i thought it’s because the R jack socket is broken, but it’s also hapoening if i use in mono.
What i figured out is, if i turned it off and wait couple of secs, it works again. I also found that, when it freezes and has no sound, i just change 2 or 3 program (again, when i press buttons, it takes 4-5 secs to take action), it starts working fine again. Then i insert the jack and has the sound and working. I use a 9V 2A adaptor.
Has anyone experienced this kind of issue before?
Thank you!
What i figured out is, if i turned it off and wait couple of secs, it works again. I also found that, when it freezes and has no sound, i just change 2 or 3 program (again, when i press buttons, it takes 4-5 secs to take action), it starts working fine again. Then i insert the jack and has the sound and working. I use a 9V 2A adaptor.
Has anyone experienced this kind of issue before?
Thank you!