Page 1 of 1
Update to OS 2.0 failed at 37%
Posted: Sat Jul 01, 2017 3:56 am
by coolpal
Figured out that .001 through .005 pkg files needed to be extracted.
Now installing and hopefully it should complete the installation.
Re: Update to OS 2.0 failed at 37%
Posted: Sat Jul 01, 2017 10:40 am
by AntonySharmman
coolpal wrote:Figured out that .001 through .005 pkg files needed to be extracted.
Not accurate ... just copy the whole extracted folder "Pa4X_OS_and_Resources_v200.pkg" in a thumb drive >=4GB
that you have formatted in Pa4X , and browse in the updater file "Pa4X_OS_and_Resources_v200.pkg.001".
Pa4X Bios when see pkg.00x , will check the integrity of all files 1-x and then it will start updating automatically ,
so if fails then it's a media error !
Posted: Sat Jul 01, 2017 4:38 pm
by coolpal
Thanks. I will format a blank USB 4 GB and try.
Posted: Sat Jul 01, 2017 6:33 pm
by keith-helen
Hi Anthony and others
I wish I had seen your article first.
I downloaded the files to my server, to a thumb drive and any other device I had near me.
the keyboard was connected to the computer but it wouldn't load the files. It didn't recognise 001.
What I did was to extract the down loaded files separately onto my thumb drive and then inserted into the keyboard. It seems they extracted further. All works ok.
I am sure I did something wrong initially, but it all works fine.
Best wishes
Keith Lawton
Re: Update to OS 2.0 failed at 37%
Posted: Sat Jul 01, 2017 6:41 pm
by Snoopy
coolpal wrote:Figured out that .001 through .005 pkg files needed to be extracted.
Now installing and hopefully it should complete the installation.
Hi,
the update consists of 6 files, not 5 !!!