es2 synched with yahama RM1x

Discussion relating to the Korg Electribe products.

Moderators: Sharp, X-Trade, Pepperpotty, karmathanever

Post Reply
zakary
Posts: 13
Joined: Mon Oct 03, 2016 6:42 am

es2 synched with yahama RM1x

Post by zakary »

has anyone synched the es2 with the rm1x so you have two sequencers running simultaneously with independant sequence lengths.

so you have 16 + 16 tracks at the same time, mostly to overcome the 4 har limitation of the es2 and have a 16 + bar sequence on the rm1x but also to have two people jamming without interrupting each other.

thanks
alphaminus
Posts: 7
Joined: Mon Dec 29, 2014 7:13 pm

re: es2 synched with yamaha RM1X

Post by alphaminus »

I have both and do it pretty well. I love the Electribe sounds, so a lot of the time I just drive it using the sequencer from the Yamaha. Otherwise edit the Midi on either device to either only send or receive the timing. iif you just get the bpm and start stop from either, it's fine. Let me recommend using the ES2 as the master, in case you have the earlier buggy RM1X OS.
zakary
Posts: 13
Joined: Mon Oct 03, 2016 6:42 am

Post by zakary »

great!

i just to want them to run in parallel synched, each with individual sequences-lengths and sounds, not record sequence in one and play sounds from the other.

i've upgraded the rm1x os so it should't be a problem which is master, thanks for the tip.

thanks
Post Reply

Return to “Korg Electribe”