Posted: Fri Jan 30, 2015 1:23 pm
THE PLOT THICKENS!!!SadPaper wrote:roblabs wrote:I think that dude was fooling around about the 1.05 OS. I've not heard ANYONE ANYWHERE mention that they were on that version.
Korg Forums
A forum for Korg product users and musicians around the world. Moderated Independently. Owned by Irish Acts Recording Studio. Hosted by KORG USA.
https://korgforums.com/forum/phpBB3/
Own the new Electribe? Post purchase info here! :-)
Page 5 of 7
Posted: Fri Jan 30, 2015 4:22 pm
this sounds like a fluke. Why is next version showing 1.03? And like I said, why doesn't anyone else have 1.05?
Posted: Fri Jan 30, 2015 4:42 pm
Now = Current OS on the machineroblabs wrote:this sounds like a fluke. Why is next version showing 1.03? And like I said, why doesn't anyone else have 1.05?
Next = OS on the card that the user wants to flash.
Typical japanglish, but who I'm I to talk?
Posted: Fri Jan 30, 2015 4:51 pm
All your updates are belong to Korg.
Posted: Sat Jan 31, 2015 2:12 am
Yup, I didn't know what version of software I had installed, so I downloaded 1.03 from the Korg site, put it on my SD Card, and went to upgrade the unit. That's what the unit shows when I start the upgrade process. Obviously I don't want to "upgrade" from 1.05 to 1.03, so I've not flashed it.roblabs wrote:this sounds like a fluke. Why is next version showing 1.03? And like I said, why doesn't anyone else have 1.05?
Unfortunately, I don't have any changelog information for release 1.05, nor have I used 1.03, so can't really tell you what the differences are.
Posted: Sat Jan 31, 2015 2:36 am
Thanks for clarifying, SadPaper. I honestly think you might be one of the only ones with this 1.05 OS. Its possible QA might have somehow missed this. Have you contacted Korg about this? Or maybe you don't want to, for fear they may send some secret service men to your door to confiscate this "special" electribe you have!SadPaper wrote:Yup, I didn't know what version of software I had installed, so I downloaded 1.03 from the Korg site, put it on my SD Card, and went to upgrade the unit. That's what the unit shows when I start the upgrade process. Obviously I don't want to "upgrade" from 1.05 to 1.03, so I've not flashed it.roblabs wrote:this sounds like a fluke. Why is next version showing 1.03? And like I said, why doesn't anyone else have 1.05?
Unfortunately, I don't have any changelog information for release 1.05, nor have I used 1.03, so can't really tell you what the differences are.
Out of curiousity, and hopefully this isn't asking you for too much, but is there anything about your tribe that you've noticed is different from the manual - new features, shortcuts, etc?
Posted: Sat Jan 31, 2015 11:35 am
The guy has an electribe2 with serial serial number: 004346.roblabs wrote:I honestly think you might be one of the only ones with this 1.05 OS. Its possible QA might have somehow missed this.
Most of people here have one between ~00200 and ~002800.
That just indicates there's a new batch out there with a more up to date firmware. No big deal.
Or - paranoid mode - there's a new electribe2 hardware revision that runs the 1.05 software, which is not compatible with the previous electribe2 released to the market.
Hence the update is not available at Korg's.
Posted: Sat Jan 31, 2015 10:41 pm
Serial# 2960
Pre-ordered from MusicStore in Germany and arrived on January 30th with Firmware 1.03
Christian
Pre-ordered from MusicStore in Germany and arrived on January 30th with Firmware 1.03
Christian
Posted: Sun Feb 01, 2015 9:57 pm
i will be ordering mine Electribe EMX-2 tomorrow (CET time) and not waiting for Sampler version. instead I plan to buy AKAI MPC for samples & loops and sync those two beasts together.
Posted: Mon Feb 02, 2015 2:12 am
Almost certainly the case. It just looks like Asia-Pacific current production run is in the 4000's and has the 1.05 firmware. People just need to keep in mind that if they want to provide feedback to Korg for feature requests etc. then they need to set their expectations to at least v1.06.Poumtschak wrote:The guy has an electribe2 with serial serial number: 004346.roblabs wrote:I honestly think you might be one of the only ones with this 1.05 OS. Its possible QA might have somehow missed this.
Most of people here have one between ~00200 and ~002800.
That just indicates there's a new batch out there with a more up to date firmware. No big deal.
I assume that my v1.05 does have bugfixes and possibly some feature changes, but since I've never used any other version, I have nothing to compare with. If anyone has specific things they want me to try in v1.05 and report back, I'm happy to do so.
Posted: Mon Feb 02, 2015 2:34 am
If you're in Mute Mode for the Trigger Pads, does pressing Trigger + Trigger Pad to silently select it also unmute that Part?
Posted: Mon Feb 02, 2015 8:20 am
No, just tested this and it does not unmute the part.Tarekith wrote:If you're in Mute Mode for the Trigger Pads, does pressing Trigger + Trigger Pad to silently select it also unmute that Part?
Process:
Play a stored pattern
Select Part Mute
Select one or more Part trigger pads to mute them
Press and hold Trigger
Select a Part trigger pad
Release Trigger
Posted: Mon Feb 02, 2015 1:56 pm
Perhaps redundant test, can you do the same test but with the shift+pad shortcuts. Also since i updated to 1.03 step jump is completely broken. Things get really out of sync when youre playing around on there. Could u test that as well? Thanks
Posted: Tue Feb 03, 2015 1:54 pm
got mine today - serial number 2913
didn't checked the firmware but it's 1.03 propably.
i played with it onloy for short bit before getting to work
but didn't noticed any clicks on headphones.
didn't checked the firmware but it's 1.03 propably.
i played with it onloy for short bit before getting to work
but didn't noticed any clicks on headphones.
Posted: Tue Feb 03, 2015 4:52 pm
you will soon...let us know when you do!