New OS and Resources v2.03 of PA800

[ikromcon]

Dear All

I have found your page while was searching Pa800 pkg files. I need help with `PA800_os_res_2.03.pkg` file. Could not find in the internet.

Problem is:
Ther is understandable noise at the back of the sound on my Pa800 keyboard. I decided to upgrade the OS from 2.01 to 2.03 but When I load the 2.03 OS and load res 2.03.bkp file there is nothing in keyboard. I mean there was no factory style, sound etc. Now I need res 2.03.pkg file to load factory sound, style etc.

Please share your experiences what can be causing for that problem. and link for res 2.03.pkg file

Whe I load the 2.01 os and than 2.01 res `pkg` files everything there but there is again noise at the back of all style ans sound.

Please help me to fix this. thanks in advance

[musiccankill]

If there is distortion on the sound output right after reinstalling a clean copy of the os, most probably you have a hardware fault and not a software one..
Try this to confirm it.
1)Go to SOUND
2)Press RECORD
3)From the arrow on the upper right corner select LOAD SAMPLE
4)Load a wav sample of your choice from a usb stick.
5)From the arrow save it as a new sample
6)Listen to the imported sample.
7a)If the sound is ok then chances are that the hardware is ok and you have a software fault somewhere so format it with the format util first and then load the 2.02 os res pkg.
7b)If the sound is distorted you most probable have a faulty CPU board (common problem on the PA800's).

Hope this helps,
Theo

[karmathanever]

I have "PA800_os_res_2.03.pkg" - do you still need it?

Pete