First Oasys freeze after 1.3 update

Discussion relating to the Korg Oasys Workstation.

Moderators: Sharp, X-Trade, Pepperpotty, karmathanever

User avatar
danatkorg
Product Manager, Korg R&D
Posts: 4205
Joined: Fri Jan 21, 2005 7:28 am
Location: California, USA
Contact:

Post by danatkorg »

Re-installing without a format will cause problems.
Please don't do this.

Formatting is almost never necessary. I am very sorry that the French distributor recommended this to you. I will be in contact with them to make sure that we all understand the proper troubleshooting and error recovery procedure.

- Dan
Dan Phillips
Manager of Product Development, Korg R&D
Personal website: www.danphillips.com
For technical support, please contact your Korg Distributor: http://www.korg.co.jp/English/Distributors/
Regretfully, I cannot offer technical support directly.
If you need to contact me for purposes other than technical support, please do not send PMs; instead, send email to dan@korgrd.com
User avatar
Brandon Daniel
QA Specialist, Korg R&D
Posts: 103
Joined: Thu Jan 20, 2005 6:02 am
Location: San Jose, CA
Contact:

Post by Brandon Daniel »

RC-IA wrote: please dan, can you explain why it makes things more difficult. if we format the disk, it should be ready to welcome the new data. is there some interference (? ), is there some data that stay on the HD even after format?
Reinstalling older versions makes it more difficult to recover the system into a usable state *without* having to format, which is how most people would prefer to recover, I think.

You are correct that being willing to format should make it all much simpler, as it allows you to start fresh with "clean" software.

As to why your 1.1.0 install is still having issues even when using the format option, I can't tell you for sure. I will say that this, generally, starts pointing to problems with either the CDs you're installing from, the CDROM drive, or the Hard Drive itself.
________________________________
||||||| official korg entomologyst |||||||
---------------------------------------------
RC-IA
Approved Merchant
Approved Merchant
Posts: 971
Joined: Fri Jan 16, 2004 10:34 am
Location: FR

Post by RC-IA »

okay guys, thanx a lot for your replies, i'll talk to Korg FR tomorrow, and thanx dan in advance to tell them not to tell to format the disk. but i must repeat that before formatting i have tried a lot of reinstall with both 1.0 and 1.1 cd set and did not work .

now i guess i'll have to wait a little longer to enjoy 1.3.

good night (here in France)
imusic
Posts: 40
Joined: Tue Feb 22, 2005 10:38 pm
Location: Switzerland

no problems

Post by imusic »

well, I did install the OS 1.3 update without any problems,...

No, authorization problems at all, all the old authorizations work like before.

Have a question about the new Karma GE. I did install the MOD.x files into user c, do I have to install the Karma GE somwhere else or are they already installed with the MOD.x files?
Please let me know, how that goes,...

best, imusic
User avatar
Brandon Daniel
QA Specialist, Korg R&D
Posts: 103
Joined: Thu Jan 20, 2005 6:02 am
Location: San Jose, CA
Contact:

Re: no problems

Post by Brandon Daniel »

imusic wrote:well, I did install the OS 1.3 update without any problems,...

No, authorization problems at all, all the old authorizations work like before.

Have a question about the new Karma GE. I did install the MOD.x files into user c, do I have to install the Karma GE somwhere else or are they already installed with the MOD.x files?
Please let me know, how that goes,...

best, imusic
You load the .KGE files just like you would load a PCG file. You can either load the KGE file on it's own by selecting the file in disk mode and hitting the load button, or you can load any KGE/PCG pair (ie, they have the same name) by selecting the PCG file, hitting load, then checking the option box to load the KGE file, too.

So in the case of the factory programs for MOD-7, you could either load MOD-7.KGE on it's own, or load it with the PCG file by selecting MOD-7.PCG, hitting load, then selecting the option to load MOD-7.KGE at the same time.

Does this make sense to you?
________________________________
||||||| official korg entomologyst |||||||
---------------------------------------------
User avatar
danatkorg
Product Manager, Korg R&D
Posts: 4205
Joined: Fri Jan 21, 2005 7:28 am
Location: California, USA
Contact:

Post by danatkorg »

RC-IA wrote:okay guys, thanx a lot for your replies, i'll talk to Korg FR tomorrow, and thanx dan in advance to tell them not to tell to format the disk. but i must repeat that before formatting i have tried a lot of reinstall with both 1.0 and 1.1 cd set and did not work .
Yes - unfortunately, as I've mentioned, reinstalling earlier versions may cause difficulties; among other things, you *must* format the HD in this case. I'm very sorry that this has been a difficult process for you.

If anyone else runs into a similar problem, please try this:

1. Make sure that all USB devices are disconnected from the OASYS.
2. Re-burn the CD, and make sure that your CD burning program completes its verification successfully.
3. Instead of using the Global Update menu command, boot from the 1.3 updater CD. This is the "Method 1" described in the update guide.

Best regards,

Dan
Dan Phillips
Manager of Product Development, Korg R&D
Personal website: www.danphillips.com
For technical support, please contact your Korg Distributor: http://www.korg.co.jp/English/Distributors/
Regretfully, I cannot offer technical support directly.
If you need to contact me for purposes other than technical support, please do not send PMs; instead, send email to dan@korgrd.com
RC-IA
Approved Merchant
Approved Merchant
Posts: 971
Joined: Fri Jan 16, 2004 10:34 am
Location: FR

Post by RC-IA »

news: korg FR has my oasys, i give them this morning (only 1 hour driving) :wink:
User avatar
medusaland
Senior Member
Posts: 293
Joined: Fri Sep 01, 2006 5:19 pm
Location: germany
Contact:

Post by medusaland »

RC-IA wrote:news: korg FR has my oasys, i give them this morning (only 1 hour driving) :wink:

:D :D :D :D :D :D :D
User avatar
sebbytriton
Senior Member
Posts: 273
Joined: Tue Jun 03, 2003 5:20 am
Location: France

Post by sebbytriton »

RC-IA wrote:news: korg FR has my oasys, i give them this morning (only 1 hour driving) :wink:
Great news :)
I'm waiting for a good new for you, that can help me for my OASYS76 !!
French OASYS76 owner :)
Psoas
Posts: 11
Joined: Sat Jun 07, 2008 7:20 pm
Location: Brussels
Contact:

Idem for me. BIgo is dead...

Post by Psoas »

Hy guys did some of you resolved their install problem on the BIG O ?
MIne is dead.... only a blue screen without any possibility to restore.
PCI connection ok and also all connectors.

The HD has 5 partitions and is formated as .extFS3.
How can I format with MAC with 5 partitions to create another boot disk for the O ?
Thks
Post Reply

Return to “Korg Oasys”