Someone understands how the filter works in the Kross 2? I cant get it working. I go to the "tone adjust" section, and messing with the "cutoff" doesnt change the sound at all. I read from the kross operation guide that the "tone adjust" affects the Filter A and B from the "P-filter" section, but when i modify the parameters there, it doesnt change the sound at all. I did try with the low pass and high pass filters (separately). i'm also not bypassing the filter!
The filter only works in certain programs? i'm missing some routing or configuration?
Filter problem
Moderators: Sharp, X-Trade, Pepperpotty, karmathanever
Hi,
I have a Kross 1st gen. But that should not matter normally.
It might also help to turn down (-99) the EG Intensity in the tone adjust page. The cut-off is a first step, but the Filter EG that gets applied may kind of overrule your setting and e.g. a closed low pass filter may still go open.
Also make sure you do tone adjust on the right timbre of your combo.
Have fun!
I have a Kross 1st gen. But that should not matter normally.
It might also help to turn down (-99) the EG Intensity in the tone adjust page. The cut-off is a first step, but the Filter EG that gets applied may kind of overrule your setting and e.g. a closed low pass filter may still go open.
Also make sure you do tone adjust on the right timbre of your combo.
Have fun!
microKORGXL, Kaossilator Pro, monotribe, SQ-1, volca fm, Kross 88 BK
Alesis SR18, Akai Miniak, Fender Strat, Line 6 Spider II 112, Zoom MS-50G
Alesis SR18, Akai Miniak, Fender Strat, Line 6 Spider II 112, Zoom MS-50G