Hello, I have now got my Songbook ,List, going fine so I decided to do a backup before moving on. I went to Media>Utility>Execute but after being informed it was protected I carried on to see what would happen, it did show the load screen but all was locked and I had to switch off and restart.
Am I missing pressing a button, not in correct sequence, or even selecting the SD card or USB which had same result. I did find it saved somewhere when it was executed to Korg card.
Full backup
Moderators: Sharp, X-Trade, Pepperpotty, karmathanever
-
- Junior Member
- Posts: 91
- Joined: Mon Sep 25, 2017 7:08 pm
- Location: Hertfordshire UK
try this
bellowsboy
try this,,
Go to the Global > Mode Preferences > Media page.
turn off factory ,, protect,,,un check it,,,
now do save all ,,,
you tell it were to save it usb or sd
when you are done you can turn on the protect again..
try this,,
Go to the Global > Mode Preferences > Media page.
turn off factory ,, protect,,,un check it,,,
now do save all ,,,
you tell it were to save it usb or sd
when you are done you can turn on the protect again..
-
- Junior Member
- Posts: 91
- Joined: Mon Sep 25, 2017 7:08 pm
- Location: Hertfordshire UK
Hi duby 2, thanks for the help. I have done it to USB and when I use my SD card will backup up to that as well. I get lost a bit with correct move needed on doing things. e.g. up to uncheck factory protect ok, now save all. So I pressed the usb option but not sure if that was correct, but lucky guess. Until I learn how to do things, every touch you do needs to be explained, I expect your fingers know their way in the sequence required. Look forward to improving and I thank all you guys for your patience. Dave