Kronos 88 - Dust cover ?

ajean · Post by **ajean** » Sun Apr 23, 2017 10:48 pm

Hi,

Do any of you guys know of a nice dust cover that would fit nicely on a Kronos-2 88 keys ?

Its just to bad that Korg doesn't produce one with a nice Kronos logo on it...

timbukktwo · Post by **timbukktwo** » Mon Apr 24, 2017 2:00 am

I believe I had purchased from "Gator" brand a stretch-type material (with a drawstring) for both my Kronos-88 and Trinton Extreme-88. It may even be 'moisture-proof', if it works. Check that out. It works well for me, and should for you, too. Don't worry about damaging the joysticks, but just be careful on how you pull the cover over the Kronos, that's all. Good luck!

Perilous · Post by **Perilous** » Mon Apr 24, 2017 3:26 am

On-Stage, Roland and Gator make those stretchy black dust covers. They work well enough. I also tried an Ebay shop called DustCoversForYou which is top quality, but the elastic is quite strong and wraps around the keyboard completely, making it slightly clumsy if you have a bunch of cables plugged into the back of the Kronos.

I don't have my Kronos88 anymore, but I still have the DCFY dust cover.

robbie50 · Post by **robbie50** » Mon Apr 24, 2017 7:51 am

http://www.compu-cap.nl/

perfect

NormC · Post by **NormC** » Mon Apr 24, 2017 2:40 pm

http://www.ebay.com/itm/Custom-padded-c ... 1ec53831ce

This is what I have. Very high quality work.

Arizona Sage · Post by **Arizona Sage** » Wed Apr 26, 2017 9:01 pm

I bought one of these last year. Love it.

http://www.ebay.com/usr/amp_covers?ul_noapp=true

Ksynth · Post by **Ksynth** » Thu Apr 27, 2017 12:01 pm

Roll of fabric, scissors, fabric tape and or sewing needle / machine.

slowtrain · Post by **slowtrain** » Thu Apr 27, 2017 10:25 pm

I've been asking this guy to make Kronos covers, but he seems to have something against workstations: https://www.gearslutz.com/board/electro ... rdust.html
He makes gorgeous synth covers though

ajean · Post by **ajean** » Thu Apr 27, 2017 11:36 pm

NormC wrote:http://www.ebay.com/itm/Custom-padded-c ... 1ec53831ce

This is what I have. Very high quality work.

Can you post pictures of the cover over your Kronos to see the fit ?

Can you leave the connectors plugged in with the cover over the Kronos ?

Thanks!

Thunder Dump · Post by **Thunder Dump** » Fri Apr 28, 2017 12:21 am

I've got a Cover Your Ax stretchy black dust cover for my K2 73 and it works perfect for the studio.

NormC · Post by **NormC** » Fri Apr 28, 2017 2:03 am

ajean wrote:
NormC wrote:http://www.ebay.com/itm/Custom-padded-c ... 1ec53831ce

This is what I have. Very high quality work.
Can you post pictures of the cover over your Kronos to see the fit ?

Can you leave the connectors plugged in with the cover over the Kronos ?

Thanks!

The back is open and it fits well with cables connected. It is very well made and you can have a custom logo. I will take a picture and post it later. I also bought the soft case from the same manufacturer. Very nice people to deal with as well.

ajean · Post by **ajean** » Sun May 07, 2017 3:03 pm

@NormC

Please do post some picture of the cover you've got from the eBay seller.

I'd like to see the fit on the Kronos.

Thanks!

GregC · Post by **GregC** » Sun May 07, 2017 7:18 pm

I like a simple solution for a cover. I am not gigging so I don't need anything fancy.

I went to a fabric store and had them take a piece of clear flexi plastic, and cut it to cover my 88.

I have 2 cats and visitors like to hover over the Kronos with a drink. My cover prevents accidents, etc.

Korg Forums

Kronos 88 - Dust cover ?

Kronos 88 - Dust cover ?

This one.................