i want to change my HARD DISC. "ata 2.5 " ¿what ca

robertocarlo · Post by **robertocarlo** » Wed Nov 21, 2012 6:27 am

I want to change my HARD DISC my Pa1X for hd. what brand do you recommend, I think being deve (HD ATA 2.5) but that capacity in gigabytes? so you can work well in my PA1X...thanks ...best regards.

wittid · Post by **wittid** » Wed Nov 21, 2012 8:54 pm

hi robertocarlo,

i changed my normal harddisk a few month ago with a SSD (ATA 2,5")
It works great and all the access and boot time improved a lot.

It´s a 64GB SSD from Transcend - TS64GPSD320

hope that helps
wittid

miden · Post by **miden** » Sat Nov 24, 2012 5:56 pm

With the appropriate adapter I assume? IIRC the PA1x has an IDE interface and not a SATA one....

robertocarlo · Post by **robertocarlo** » Mon Nov 26, 2012 10:02 am

ooh thanks for your answer friend. look for the HD 60 gb.

robertocarlo · Post by **robertocarlo** » Mon Nov 26, 2012 10:08 am

MIDEN not understand your answer (sorry) Explain to me please ..best regards

wittid · Post by **wittid** » Mon Nov 26, 2012 12:08 pm

miden - there are IDE SSD on market too

- that´s the reason i wrote ATA which means IDE.

it´s very clear that PA1X doesn´t have a SATA-HD.

robertocarlo · Post by **robertocarlo** » Tue Nov 27, 2012 8:31 am

far as I know. uses only the disks Pa1X "ATA 2.5" .. but I have doubts as to the capacity size.(¿¿¿ HD??) BEST REGARDS

neverkorgagain · Post by **neverkorgagain** » Tue Nov 27, 2012 11:29 pm

i had 40gb in my pa1x and it worked perfectly.

robertocarlo · Post by **robertocarlo** » Wed Nov 28, 2012 8:02 am

nerverkorgagain hello thanks...I'll look that HD..How much memory does your Pa1X ud now? .. still is a problem as 2x 16 is very little memory..

wittid · Post by **wittid** » Thu Nov 29, 2012 6:28 am

it´s not possible to use more than 2x16MB and it depends on the material u use - my key is very fine with my set.

robertocarlo · Post by **robertocarlo** » Fri Nov 30, 2012 8:03 am

if that thought. my Pa1X also works well., but was hoping someone had some trick I could dI have always regretted much. With so little RAM 32 is too little. I can not understand why even in the design of Pa1X (do not know if it could be extended to more ram memory) eg 64/128 .. I think this is a "dream" impossible.o better and improve the performance of Pa1X..... I think if possible it .. but i dont know that person may make this possible. is also clear that the problem of OS version or update.THIS IS STILL A GREAT KEYBOARD PA1X....well my friend best regards

neverkorgagain · Post by **neverkorgagain** » Thu Dec 06, 2012 8:34 pm

now its posible to extend ram memory on korg pa1x - pa1xpro up to 128mb with some little hardware moddifying.... its already explained on few serbian music forums.....

robertocarlo · Post by **robertocarlo** » Fri Dec 07, 2012 10:22 am

very good friend. Could you explain how could that be possible?. because everyone says that's not possible ... but maybe you have a way to make that possible. Could you tell me the step by step. "the transformation" or some video would be great..

..best regards.

robertocarlo · Post by **robertocarlo** » Fri Dec 07, 2012 10:33 am

hi witted y and friends ..friends have been looking ata HD 2.5 ... but there is only capacity 160 gb and 360 gb .. my question is: WILL NOT MY PROBLEM PA1X can read (or work with that ability) I do not know that there are many difference in 40GB to 160GB or 360GB worse NOTE: maybe my Pa1X can not read or work well with that capability. best regards.

wittid · Post by **wittid** » Sat Dec 08, 2012 7:30 am

i bought this one and it works fine - it´s a SSD

http://www.amazon.de/Transcend-TS64GPSD ... 805&sr=8-1

Korg Forums

i want to change my HARD DISC. "ata 2.5 " ¿what ca

i want to change my HARD DISC. "ata 2.5 " ¿what ca

ok thanks witted..

thanks MIDEN

thanks for your response friends

hi neverkorgagain thanks

hi wittid

hi neverkorgagain ..how is possible ?

hi witted and more friends (one question)?