HELP! with Triton Rack and Loading PCG and Samples
Moderators: Sharp, X-Trade, Pepperpotty, karmathanever
-
Vangelismusic
- Senior Member
- Posts: 417
- Joined: Thu Oct 18, 2007 8:28 pm
- Location: Florida US,KORG PA5X,1000,KORG TRITON EXTREME,KRONOS 2
HELP! with Triton Rack and Loading PCG and Samples
I have a Triton Rack and I think that I have a set that was made for an Extreme, I tried loading this pcg set and it says Files unailable, is this because the pcg. file is 2.24 MB? do I have to convert it somehow?
-
billbaker
- Platinum Member
- Posts: 2206
- Joined: Wed May 31, 2006 11:56 pm
- Location: Vienna, Virginia, USA
- Contact:
The Extreme based set is telling the Rack to look for ROM sample addresses that are missing -- the ROM set on the extreme is way bigger than the rack - so as the rack looks for anything higher than the Classic/Studio set you'll get an error message.
The extreme IS compatible downward(*) - but the Rack will not load Extreme PCG.
(*) for classic and studio voices - there is not a 1-to-1 match between the EXB boards and the Extreme, even tho' "the entire library of sounds is there".
-----------
You're best option if you REALLY want to use these voices is to find out what ROM sample they used then get as close as possible -- in other words make all the voices of the set you're trying to load Classic-ROM-based (a software editor would certainly speed this process).
-- AND --
in the case of sets written for CLASSIC+EXB, you also have to make adjustments to the referenced ROM samples because the extreme CANNOT look for an expansion board - even tho the identical samples may be in its ROM library.
BB
The extreme IS compatible downward(*) - but the Rack will not load Extreme PCG.
(*) for classic and studio voices - there is not a 1-to-1 match between the EXB boards and the Extreme, even tho' "the entire library of sounds is there".
-----------
You're best option if you REALLY want to use these voices is to find out what ROM sample they used then get as close as possible -- in other words make all the voices of the set you're trying to load Classic-ROM-based (a software editor would certainly speed this process).
-- AND --
in the case of sets written for CLASSIC+EXB, you also have to make adjustments to the referenced ROM samples because the extreme CANNOT look for an expansion board - even tho the identical samples may be in its ROM library.
BB
billbaker
Triton Extreme 88, Triton Classic Pro, Trinity V3 Pro
+E-mu, Alesis, Korg, Kawai, Yamaha, Line-6, TC Elecronics, Behringer, Lexicon...
Triton Extreme 88, Triton Classic Pro, Trinity V3 Pro
+E-mu, Alesis, Korg, Kawai, Yamaha, Line-6, TC Elecronics, Behringer, Lexicon...
-
Vangelismusic
- Senior Member
- Posts: 417
- Joined: Thu Oct 18, 2007 8:28 pm
- Location: Florida US,KORG PA5X,1000,KORG TRITON EXTREME,KRONOS 2
Well, can I load the samples? I guess I would have to load one by one?billbaker wrote:The Extreme based set is telling the Rack to look for ROM sample addresses that are missing -- the ROM set on the extreme is way bigger than the rack - so as the rack looks for anything higher than the Classic/Studio set you'll get an error message.
The extreme IS compatible downward(*) - but the Rack will not load Extreme PCG.
(*) for classic and studio voices - there is not a 1-to-1 match between the EXB boards and the Extreme, even tho' "the entire library of sounds is there".
-----------
You're best option if you REALLY want to use these voices is to find out what ROM sample they used then get as close as possible -- in other words make all the voices of the set you're trying to load Classic-ROM-based (a software editor would certainly speed this process).
-- AND --
in the case of sets written for CLASSIC+EXB, you also have to make adjustments to the referenced ROM samples because the extreme CANNOT look for an expansion board - even tho the identical samples may be in its ROM library.
BB
From the size of the pcg would that be an extreme file?
thanks