Korg Forums

Hi ! I'm trying to load some of my favorite styles from usb memory stick into various empty spaces that are located in the style play section of my PA-800. How do I unlock or unprotect this section in order to load those styles? ALSO, Is there much of a difference between OS 2.0 and 2.01? I'm ...

Hi, I have a PA-80 for sale. It runs on V3.05. It has an 9 gig hard drive installed loaded with various styles, and a vocal harmonizer installed. It would be shipped in it's original box. It includes the original 3.01 instruction manual and an additional 3.05 version manual. many style disks, 7 ...

I Had the same problem with my PA-80. The problem was corrected by reconnecting the speaker wires to the circuit board inside the keyboard. Unfortunately, this will require that you, or a qualifyed technician, take the keyboard apart. Please keep in mind that that the problem in my deyboard may NOT ...

The bottom of the keyboard comes off which should give you access to the joystick. When removing the bottom cover, you will find that some of the screws are set deep in the bottom cover. You will need a long blade Phylips screwdriver. Please keep in mind that the wires to the speakers are a bit ...

Here is how I MUTE, Change sounds, and add sounds. In style play mode, select a style. Press MENU. Select Mixer. Press EXIT/NO. (Here you can see what instrument is selected to play and what is not selected to play). To MUTE an instrument that is selected to play(little piano keys on), press the ...

Hi Masi music! You did nat indicate if you opened the keyboard to see if a connector may have been disconnected as the result of vebration. I had such a problem with my PA-80 and reconnecting the connector solved the problem. I didn't know that the outputs, located on the back panel, were not part ...

OK ! now try connecting an external amp WITH BUILT IN speakers to output (RIGHT L/MONO) See if you get sound from those outputs. (those outputs are located on the back panel). Sound out of these outputs indicate a good amp, and possibly bad speakers. No sound indicate possible bad amp but probably ...

Hi from ben. You did not indicate if any sound can be heard from any of the four speakers. If only one side has sound, try changing the speakers from one side to the other, the speakers are interchangable... or the lack of sound could be the result of a wire having come loose during transportation ...

Can someone please point me in the right direction where I can download additional drum kits or sounds (Programs) to add to my PA-80 User program side? thanks, Ben