Page 1 of 1
USB stick doesn't show up
Posted: Wed Feb 19, 2014 11:23 am
by Jomosoft
I just got my brand new PA900. I inserted an fresh formatted USB stick with some midi files in the front but when I touch song on the touchscreen the USB disk doesn't show up, just the internal disk. Any thoughts ? I tried another stick, the same.
Posted: Wed Feb 19, 2014 12:25 pm
by Marinos
Try looking at the bottom left of the screen. You can touch where it says "drive" and it should show a choice to select USB, else touch "drive" and use the dial to show USB and your files should appear
Posted: Wed Feb 19, 2014 12:35 pm
by Jomosoft
Yes I know were the USB is suppose to show up but it doesn't, just the internal disk, no other option in the dropdown list. When I insert the stick, however, it shows a message that a usb device is recognized....I also can format it.
Posted: Wed Feb 19, 2014 1:52 pm
by Marinos
You say you have midi songs - are you gong to song mode first and then trying to load from USB. You shoudn't go to media to do it
Posted: Wed Feb 19, 2014 1:55 pm
by Jomosoft
In song mode, I tap PLY1 and than the drop down list DISK. USB doesn't show in the drop down list..
Posted: Wed Feb 19, 2014 1:57 pm
by Marinos
OK try going to media first and see if you can see the USB there and if you see the songs listed
Posted: Wed Feb 19, 2014 2:09 pm
by Jomosoft
Nop

Guess I'll have to try another stick unless I need to "unlock/enable" the USB port or something like that ??
Posted: Wed Feb 19, 2014 2:16 pm
by Marinos
No I think you may need to format the USB on the keyboard initially. There isn't anything form memory locking the USB
Posted: Wed Feb 19, 2014 2:49 pm
by Jomosoft
also did that with same result..
Posted: Wed Feb 19, 2014 2:52 pm
by Marinos
Can you see the songs or anything at all under media using the usb stick? Are they definitely midi files?
Posted: Wed Feb 19, 2014 5:19 pm
by Jomosoft
No the USB option doesn't appear in the drop down list. I'm going to try some other sticks tonight, I suspect that for some reason my scandisk is the problem although it works fine on my computers.
Posted: Wed Feb 19, 2014 7:23 pm
by BillyHank
Maybe that old "Factory Restore" option is in order???
Posted: Wed Feb 19, 2014 9:40 pm
by Jomosoft
I just dida startup with the usb stick mounted and everything works fine now ! I can even remove and plug in again !