Does microstation support other pcg file from other korgs?
Or does korg have a converter to make pcg files compatible with every korg?
Microstation Compatibility
Moderators: Sharp, X-Trade, Pepperpotty, karmathanever
-
raffi.nordiguian
- Posts: 42
- Joined: Mon Jun 25, 2012 10:31 pm
- Location: Lebanon
-
michelkeijzers
- Approved Merchant
- Posts: 9112
- Joined: Thu Feb 08, 2007 3:10 pm
- Location: Netherlands
- Contact:
I'm afraid both questions have to be answered negatively.
Actually the microstation PCG file is very different than from the Triton/M3/M50/Oasys/Kronos. That is the reason I could not get PCG Tools to work yet.
Also there is no converter, but there is not even a converter between the Triton, M and O/K series. You can mostly use PCG files from the Triton on any Triton (with some limitations), and M50 PCG files can be load on an M3 and vice versa. Also Oasys files can be read on a Kronos but not vice versa.
Actually the microstation PCG file is very different than from the Triton/M3/M50/Oasys/Kronos. That is the reason I could not get PCG Tools to work yet.
Also there is no converter, but there is not even a converter between the Triton, M and O/K series. You can mostly use PCG files from the Triton on any Triton (with some limitations), and M50 PCG files can be load on an M3 and vice versa. Also Oasys files can be read on a Kronos but not vice versa.
Developer of the free PCG file managing application for most Korg workstations: PCG Tools, see https://www.kronoshaven.com/pcgtools/
-
raffi.nordiguian
- Posts: 42
- Joined: Mon Jun 25, 2012 10:31 pm
- Location: Lebanon
