Korg Forums

Posted: **Wed Dec 01, 2010 10:29 am**

with the microsampler??if so what kind of cable do i need???

thanks in advance.

Posted: **Wed Dec 01, 2010 10:19 pm**

anyone?

Posted: **Thu Dec 02, 2010 4:08 pm**

You can sample off anything that makes noise.

Either via a microphone or line connection.

Depending on the Machine you mention, you'll probably need either a jack lead, stereo jack lead, or stereo RCA phonograph to stereo jack.

Check your connections, read the specs on the korg site. You could have done that in the time I just took to write this...

Posted: **Thu Dec 02, 2010 5:53 pm**

so it needs 1/4 mono jacks to rca i guess... where the hell do you find these kinds of cables??i checked every music and electronic store near me and they dont have anything with 1/4 mono jacks

Posted: **Thu Dec 02, 2010 7:17 pm**

lcplcp1 wrote:i checked every music and electronic store near me and they dont have anything with 1/4 mono jacks

You're better be kidding. Very popular cable type: http://www.zzounds.com/cat--1-4-Inch-to ... bles--2363 - even here in Russia, amongst bears with balalaikas.

You can buy couple of RCA-jack adapters, and then use simplest 2RCA-2RCA cable.

Posted: **Thu Dec 02, 2010 7:57 pm**

If you're in uk you can get them in a million places:

Digital village
Maplins

Etc etc

Guessing there would be plenty on eBay as well.

Posted: **Sat Dec 18, 2010 5:17 am**

I have +/- 100 of these adapters for all the analog stuff:
http://www.radioshack.com/product/index ... Id=2062455

Posted: **Fri Jan 14, 2011 11:31 pm**

HandyTrax is one of the few turntables you can sample directly from, as it has its own RIAA preamp built in, and outputs from the RCA connectors at standard line level. Most other turntables require an external preamp before the sampler.

Korg Forums

can i sample directly off my vestax handytrax??

can i sample directly off my vestax handytrax??