Korg Forums

Posted: **Wed Aug 26, 2009 8:14 pm**

Hi Does any one know if it is possible to convert pa1x styles to i3 format

Thanks

Posted: **Wed Aug 26, 2009 11:22 pm**

Hi sterog. I think you'll find the answer is no here. Certainly EMC Styleworks won't do the job. I don't know of any other program that could do what you ask.

Posted: **Thu Aug 27, 2009 6:13 pm**

Hi Mrniceneasy
I had a feeling it was not very likely,but thought i'd ask.

Thanks for your reply
Regards Sterog

Posted: **Sat Sep 12, 2009 9:20 pm**

it is posible but i3 has not so many style elements like pa1x so you will lost some of this components.
I hawe to seil a upgrade for i3 on i 3 go just 4 styles with this upgrade is 32 styles in RAM

Posted: **Mon Sep 14, 2009 3:44 am**

Sorry but this is not possible unless you use some software to perform the conversion. Korg style formats are not backward compatible.

What styles were you wanting for the i3? Some i3 styles are actually current PA2Xpro/PA1XPro styles.

Cheers

Pete

Posted: **Mon Sep 14, 2009 6:47 pm**

Hi pete

I've converted some yamaha styles to pa1x and i wanted to hear what they sound like on the i3.

Thanks for your reply
George

Posted: **Mon Sep 14, 2009 7:41 pm**

Hi George, as an experiment here can you try these styles on your i3. These have been converted from yamaha

http://www.box.net/shared/c47suvlli2

Posted: **Mon Sep 14, 2009 9:32 pm**

Hi Keith
Thanks for the converted styles
They load in the i3 ok, some user slots say no data but the ones that load play ok.
Do you know how they were converted?

Thanks again for your help

Best Regards George

Posted: **Tue Sep 15, 2009 4:56 pm**

sterog wrote:Hi Keith
Thanks for the converted styles
They load in the i3 ok, some user slots say no data but the ones that load play ok.
Do you know how they were converted?

Thanks again for your help

Best Regards George

Hi George, I did them with EMC

What do they actually sound like on the i3 as they've come off a brand new board?

Posted: **Tue Sep 15, 2009 11:04 pm**

Hi Keith

I tried your styles again today and some like hully gully play ok but the german walz played with a stutter as though it was in the wrong timing.
Iv'e got the free Korg version of EMC but it only converts the PA keyboards.
Does the full version convert the older models?
Thanks for your interest.

Best Regards George

Posted: **Wed Sep 16, 2009 7:44 am**

Hi George, the full version of XT works but it seems with only intermitent results. Probably not worth the cost of the program to go backwards to older keyboards like the i3.

Posted: **Wed Sep 16, 2009 8:06 pm**

Hi Keith

It was worth trying anyway, i can still get an idea how they sound with the Yamaha - PA1x conversions.

Best Regards George

Korg Forums

PA1X styles to i3 format

PA1X styles to i3 format

Pa1x to i3 styles

pa1x to i3