Korg Forums

Mr. tramannoni you have a PM ...

That happens to me and maybe also about 20 my friends using same keyboard......i`ve tried million options and it`s doing again and again in the middle of the evvening.i think that is OS bug...dont waste time to find and correct that problem.......that`s it.it happens (but in this not-cheap KB?)
We`ll wait new os to see is it good.....
Best Regards Dalton

When sequencing to external sequencer (daw) and you play the recording part if you use a dnc sound like alto sax you hear rx noises to loud. not when you play on pa3. Only when playing from sequencer.

musicrazy wrote:When sequencing to external sequencer (daw) and you play the recording part if you use a dnc sound like alto sax you hear rx noises to loud. not when you play on pa3. Only when playing from sequencer.

This is happening also to me.
I usualy crate midi files by recording styles in the internal sequencer.
Then I import this midi file in Cubase and make modifications that I need.
When cubase is running the pa3 the rx noises in the midi file are very very loud.
So the result is that the rx noices become a disadvantage in the song.

Hi. This is not a bug but instead a very disappoiting funtion... I record a midi file on sequencer (with style) and sometimes when i try to load the midi on player (song mode) pa3x tells me the file is too big.... even my old roland va7 can read the file .... except pa3x..... very LOW memory avaible for midi player on song mode. If i go to sequencer mode i can load and play the song.... it sould not work like this. Hope korg changes this.

1. When I am to edit midi file in sequencer ... after returning to STYLE is freezing SPLIT point. Korg should restart again
2. If I're playing midi file where samples are on a track ... sometimes I hear false notes to those tracks with samples

I do NOT know if this is a bug or not.

When i load my pa800 set into the PA3x, everything seems to be working fine so far , except all of my Fill 3s are missing. None of the Fill 3s are transfered.

when you load style older than pa3 series you will have only fill 1,2 and break(here it is your fill 3)...fill 3 and 4 are empty. When you go to record/edit current style automated process convert guitar mode and copy fills from 1-2 to fill 3 -4 and if you write that style you'll get fill 3 and 4 but they will be the same as 1 and 2...

My problem is "Program change" every time i change a style it changes performance, and that option to tick on-off is not working.

Second problem is kb is VERY slow to load up.

Third problem is when playing style and i change a performance there is about 2-3 seconds wait before you can start playing with selected performance, this is slower than pa2x and very annoying.

Pa2x wrote:My problem is "Program change" every time i change a style it changes performance, and that option to tick on-off is not working.

Second problem is kb is VERY slow to load up.

Third problem is when playing style and i change a performance there is about 2-3 seconds wait before you can start playing with selected performance, this is slower than pa2x and very annoying.

... can't confirm !!! on my I haven't those problems ...

http://www.youtube.com/watch?v=Vt_0UVz_ ... re=related


is this fixed

Another problem is TC Helicon when using auto tune option, lets say i start singing and mic adjusts according to my voice, but when im not singing during the song mic picks up noise from playing kb and it changes its frequencies, so next time i start singing it is all messed up, there should be an option to lock up the settings once adjusted according to my voice so it CANT change.

Kb is so slow to load up, it takes me 10 min to load.

OS is very slow when changing performances, this must be fixed.

I was editing A style with event edit, the drum track & all of a sudden the keyboard frozzzzze Cant do anything. Even can't hit the standby button
I needed to shut down the system loosing everything in this style

helpcrown wrote:I was editing A style with event edit, the drum track & all of a sudden the keyboard frozzzzze Cant do anything. Even can't hit the standby button
I needed to shut down the system loosing everything in this style

I am having the same problem frequently... The only way i can live with this is that i choose "write style" very often so that i don't have to start over when its freezed. But it is anoying...

While in sequencer event edit mode, keyboard freezes. This has happened several times. :!: